Blog
Nexans Euromold Cable Connectors Terminating 11kV Cables Into Siemens NXPLUS GIS Switchgear
January 8th, 2020Image: Darren Street Cable Jointer at D+R Jointing Services Ltd.
Pictured: Nexans Euromold Cable Connectors Terminating 11kV Cables Into Siemens NXPLUS Gas Insulated Switchgear (GIS).
Jointers blog
Subscribe now to our POWER NEWSLETTER– a monthly email circulation packed with news, projects, videos, technical tips, training information, promotions, webinars, career opportunities and white papers.
Includes access to our popular JOINTERS BLOG with contributions from utility professionals, linesmen and cable jointers working on MV HV EHV cables and overhead lines typically at 11kV, 33kV, 66kV and up to 132kV.
15,000+ Subscribers. ➡ 
Salisbury 40cal Arc Flash Suit Protection For Safe Electrical Switching, Linking & Fusing
January 8th, 2020Image Courtesy of: Nick Ravden – Electrical Supervisor/Authorised Person at TriConnex Ltd
Pictured: Salisbury 40cal Arc Flash Suit Protection For Electrical Switching, Linking & Fusing
Salisbury can offer a complete solution of Personal Protective Equipment (PPE) for all electrical workers. Salisbury personal protective equipment protects workers against electrical hazards as defined by OSHA Regulations and the NFPA 70E Standard for Electrical Safety in the workplace.
Jointers blog
Subscribe now to our POWER NEWSLETTER– a monthly email circulation packed with news, projects, videos, technical tips, training information, promotions, webinars, career opportunities and white papers.
Includes access to our popular JOINTERS BLOG with contributions from utility professionals, linesmen and cable jointers working on MV HV EHV cables and overhead lines typically at 11kV, 33kV, 66kV and up to 132kV.
15,000+ Subscribers. ➡
Masterclass – 400kV Low Pressure Oil Filled Prysmian Extended Ferrule Straight Cable Joint
January 8th, 2020400kV
Joint : 400kV Prysmian Extended Ferrule Straight Joint.
Location : Regents Canal Shoreditch London UK.
Cable Jointer : Steve Fielder.
The EHV cable jointers on this installation were Steve Fielder and Matt Taffs – the fluid fitters were Stephen McLean and Billy Miller.
The Prysmian EHV cable joint was installed under induced voltage working conditions after a canal boat mooring spike was accidentally hammered into the cable causing a cable fault.
The canal had to be dammed off so a new concrete trench could be cast by the civil engineers to house the repair joint.
The ferrule is 1050mm in length providing an overall installed cable joint length exceeding 6 metres. The cable insulation is built up using block paper rolls, each profile end is then hand carved before the flashover roll is applied and finally screened.
The sequence of photographs show the highly-skilled process of wiping and plumbing high voltage cables and the boxing up and then loading of the cable onto a permanent lifting frame ready to lower into the cable trench. Water cooling pipes were required during the fitting of the Prysmian joint and joint shell mould body.
Jointers blog
Subscribe now to our POWER NEWSLETTER– a monthly email circulation packed with news, projects, videos, technical tips, training information, promotions, webinars, career opportunities and white papers.
Includes access to our popular JOINTERS BLOG with contributions from utility professionals, linesmen and cable jointers working on MV HV EHV cables and overhead lines typically at 11kV, 33kV, 66kV and up to 132kV.
15,000+ Subscribers. ➡
66kV High Voltage Cable Jointer Using Alroc Tools To Strip XLPE Cable Insulation
January 8th, 202066kV
Pictured : 66kV Cable Jointer Using Alroc Stripping Tools To Remove XLPE Insulation.
The underground high voltage power cables protected by Class 1 cable duct are being stripped and prepared prior to terminating into 66kV substation switchgear.
Image : Smith Bros Contracting
T&D are leading distributors of MV Jointing Equipment and are approved suppliers for 3M Cold Shrink, SPS Heat Shrink and Nexans Euromold EPDM Rubber type cable joints, terminations and connectors for 11kV-33kV medium voltage distribution networks.
Jointers blog
Subscribe now to our POWER NEWSLETTER– a monthly email circulation packed with news, projects, videos, technical tips, training information, promotions, webinars, career opportunities and white papers.
Includes access to our popular JOINTERS BLOG with contributions from utility professionals, linesmen and cable jointers working on MV HV EHV cables and overhead lines typically at 11kV, 33kV, 66kV and up to 132kV.
15,000+ Subscribers. ➡
ASTOR Power Transformer 100 MVA 154kV-33.6kV OLTC Energised Transformer
January 8th, 2020Image: Ibrahim Tunca – SGB Otomasyon Elektrik Enerji İth.İhr.San.ve Tic.Ltd.Şti şirketinde Sales Marketing Manager
Pictured : ASTOR Power Transformer 100 MVA 154kV-33.6kV OLTC Energised Transformer
ASTOR produces transformers used in electric energy transmission and distribution in an efficient and environmentally-sensitive way – ASTOR manufacture power and distribution transformers between 5 MVA-150 MVA, 36kW-220kW.
ASTOR MV-HV Power & Distribution Transformers
- Distribution Transformers
- Power Transformers
- Dry Type Transformers
- Special Type Transformers
Jointers blog
Subscribe now to our POWER NEWSLETTER– a monthly email circulation packed with news, projects, videos, technical tips, training information, promotions, webinars, career opportunities and white papers.
Includes access to our popular JOINTERS BLOG with contributions from utility professionals, linesmen and cable jointers working on MV HV EHV cables and overhead lines typically at 11kV, 33kV, 66kV and up to 132kV.
15,000+ Subscribers. ➡
