Nexans AIN Slip-On Termination | XLPE Indoor Single Core 12kV 24kV 36kV MV Cables

Published 05 Dec 2018

Indoor Cable Termination | Cold Shrink | Single Core | 11kV 33kV 42kV

Cable Terminations

Nexans AIN are single core cold shrink slip-on cable terminations for use indoor and specified to terminate and connect medium/high voltage cables in the following voltage classes:

6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV
18/30 (36) kV
20.8/36 (42) kV

Slip-on terminations are cold applied terminations require no “hot-working” for safe use in potentially explosive atmospheres and hazardous area locations – the cable terminations are designed for use with polymeric insulated cables (XLPE & EPR). To enable the fault repair, extension, splicing and jointing of existing LV MV HV power cables up to 33kV we also stock a complete range of cold shrink joints.

Slip On Indoor Cable Terminations 11kV 33kV 42kV Euromold AIN – Design

Indoor slip-on cable termination kit list comprising:

Cable lug (not included in the standard kit) – crimp lugs or shearbolt lugs are suitable
High flexibility silicone rubber housing, allowing larger tolerances on cable insulation diameters, with integrated conductive rubber insert, providing stress relief
Earthing lug (not included in the standard kit)

Nexans AIN COLD SHRINK TERMINATION SPECIFICATION

The following tables enable the selection of cable terminations using Cold Shrinkable technology manufactured by Nexans:

Euromold Termination Slip On Cold Shrink	Voltage Um (kV)	Conductor Sizes (sqmm)
Euromold Termination Slip On Cold Shrink	Voltage Um (kV)	min	max
Nexans AIN 10	12kV	25sqmm	1200sqmm
Nexans AIN 20	24kV	35sqmm	1200sqmm
Nexans AIN 30	36kV	50sqmm	1000sqmm
Nexans AIN 36	42kV	150sqmm	1000sqmm

EUROMOLD AIN selection table

For Indoor MV HV Cable Terminations

Select the Euromold part number corresponding to both the system voltage and the cable insulation diameter in mm – the complete kit comprises of 3 termination housings, installation instructions, special lubricant, wiper, adhesive tape and field control mastic.

Voltage Um (kV)	Conductor Sizes (sqmm)		Diameter Over Core Insulation (mm)		Number Of Sheds	L (mm)	Dia. D (mm)	Nexans AIN Ordering Part Number
Voltage Um (kV)	min	max	min	max	Number Of Sheds	L (mm)	Dia. D (mm)	Nexans AIN Ordering Part Number
12kV	25sqmm	95sqmm	12.7	21.0	2	150	37	3 x AIN 10-1
	120sqmm	240sqmm	19.0	28.5	2	150	43	3 x AIN 10-2
	300sqmm	500sqmm	27.0	37.0	2	150	60	3 x AIN 10-3
	630sqmm	800sqmm	34.0	46.0	3	225	68	3 x AIN 36-4
	1000sqmm		39.0	50.0	7	405	98	3 x AIN 36-5
	1200sqmm		46.0	58.0	7	405	98	3 x AIN 36-6
24kV	35sqmm	70sqmm	18.0	23.5	3	225	47	3 x AIN 20-1
	95sqmm	240sqmm	22.5	33.0	3	225	56	3 x AIN 20-2
	300sqmm	500sqmm	31.0	41.0	3	225	68	3 x AIN 20-3
	400sqmm	630sqmm	34.0	46.0	3	225	68	3 x AIN 20-4
	630sqmm	800sqmm	39.0	50.0	7	405	98	3 x AIN 36-5
	1000sqmm	1200sqmm	46.0	58.0	7	405	98	3 x AIN 36-6
36kV	50sqmm	70sqmm	23.5	29.0	6	300	74	3 x AIN 30-1
	95sqmm	240sqmm	27.0	38.0	6	300	74	3 x AIN 30-2
	240sqmm	400sqmm	32.0	43.0	6	300	81	3 x AIN 30-3
	400sqmm	630sqmm	39.0	50.0	7	405	98	3 x AIN 36-5
	630sqmm	1000sqmm	46.0	58.0	7	405	98	3 x AIN 36-6
42kV	150sqmm	300sqmm	31.5	41.0	7	405	98	3 x AIN 36-4
	400sqmm	630sqmm	39.0	50.0	7	405	98	3 x AIN 36-5
	630sqmm	1000sqmm	46.0	58.0	7	405	98	3 x AIN 36-6

Nexans

Thorne & Derrick distribute the complete range of medium/high voltage electrical equipment manufactured by Nexans – this includes Euromold bushings for use with oil fluid or gas insulated switchgear or transformers and associated screened separable connectors according to both IEC (Euromold) and IEEE (Elastimold) for the termination, connect+disconnect of MV-HV cables onto power distribution systems. To protect power systems against high voltage surges resulting from lightning or switching a complete range of surge arresters are available to be used with Euromold connectors in 11kV/12kV, 24kV and 33kV/36kV voltage classes.

Nexans Joints Connectors Terminations