Nexans SREF Heat Shrink Termination | XLPE Outdoor Single Core 12kV 24kV 36kV MV Cables

Published 05 Dec 2018

11kV Termination - Single Core XLPE EPR Heat Shrink Cable Terminations

Cable Terminations 11kV 33kV | Single & 3 Core | Medium & High Voltage Cables MV HV

Cable Terminations

Nexans SREF are single core heat shrink cable terminations for use outdoor and specified to terminate and connect medium/high voltage cables in the following voltage classes:

  • 6/10 (12) kV
  • 6.35/11 (12) kV
  • 8.7/15 (17.5) kV
  • 12/20 (24) kV
  • 12.7/22 (24) kV
  • 18/30 (36) kV
  • 19/33 (36) kV

Heat shrinkable 11kV-33kV Nexans single-core termination kits, suitable for medium voltage polymeric (XLPE and EPR) insulated cables within an outdoor environment.

11kV Terminations Single Core XLPE EPR Heat Shrink Cable Terminations

11kV Terminations Single Core XLPE EPR Heat Shrink Cable Terminations


Cable Termination 11kV Design
  1. Cable Lugs (Cembre Crimp Lugs or Pfisterer Sicon Mechanical Lugs)
  2. Water Sealing Mastic
  3. Anti Tracking Heat Shrink Tube (Red)
  4. Stress Control Heat Shrink Tube (Black)
  5. Stress Control Mastic
  6. Anti-Track Rain Sheds (Outdoor Cable Terminations)

Nexans SREF Heat SHRINK TERMINATION SPECIFICATION

The following tables enable the selection of outdoor cable terminations using Heat Shrinkable technology manufactured by Nexans:

Nexans Order Code  Cable Voltage  Conductor Range – Single Core Cables  Cable Termination Tails
SREF 12 16-25  11kV  16, 25sqmm  650mm
SREF 12 35-95  11kV  35, 50, 70 95sqmm  650mm
SREF 12 120-240  11kV  120, 150, 185, 240sqmm  650mm
SREF 12 240-500  11kV  240, 300, 400, 500sqmm  650mm
SREF 12 400-630  11kV  400, 500, 630sqmm  650mm
SREF 12 630-800  11kV  630-800sqmm  650mm

11kV Cables - Copper Wire v Copper Tape Screen Termination

11kV Cables – Copper Wire v Copper Tape Screen Termination


Nexans

Thorne & Derrick distribute the complete range of medium/high voltage electrical equipment manufactured by Nexans – this includes Euromold bushings for use with oil fluid or gas insulated switchgear or transformers and associated screened separable connectors according to both IEC (Euromold) and IEEE (Elastimold) for the termination, connect+disconnect of MV-HV cables onto power distribution systems. To protect power systems against high voltage surges resulting from lightning or switching a complete range of surge arresters are available to be used with Euromold connectors in 11kV/12kV, 24kV and 33kV/36kV voltage classes.

Nexans Joints Connectors Terminations

Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV 

 ➡ Read: Thorne & Derrick Announce Distribution Agreement & Contract With Nexans 

Thorne & Derrick International

 

Further Reading