Aluminium Cable Splice Connectors LV MV HV 11kV-33kV

View Sub Products

Aluminium Cable Splice Connectors LV MV HV 11kV-33kV

Aluminium Cable Splice Connectors LV MV HV 11kV-33kV

 

Cable Splices

Cembre MTMA-GC series of cable splice connectors are made from an aluminium tube of a purity equal to or greater than 99.5% and are used to joint and connect aluminium conductors on cables working at LV, MV and HV including 11kV-33kV.

The internal surface of the aluminium cable splice connectors is protected against oxidation due to integral grease with an exceptionally high dropping point – the connector includes putty to fill the indent cavities.

Cembre MTMA-GC aluminium connectors

  • Designation – AL 99.50
  • Standard – DIN 1712/1976 Teil 3
  • Electrical Resistance at 20ºC (p, n• cm)  – 2.874
  • Breaking Resistance (N/mm2)  – 85 ÷ 129
  • Stretching at 5% – 10 + 23
Aluminium Cable Splice Connectors LV MV HV 11kV-33kV

Aluminium Cable Splice Connectors – Cembre MTMA-GC

Aluminium Cable Splice Connectors

LV MV HV 11kV-33kV

Cembre Connector Part Ref Conductor Size sqmm Upper Adaptor Lower Adaptor Pre-rounding Dies Set Indentor Cembre Crimping Tool Dimensions
Side A Al Side B Al/Cu ∅A ∅B L
MTMA 16-10-GC 16 10 AU 130-150 AC130-P HT 131-UC, RHU 131-C, B 131-UC 5,5 4,3 90,5
MTMA 25-10-GC 25 10 UP 130-25 PS 130-35/E 6,5 4,3 90,5
MTMA 25-16-GC 16 UP 130-25 6,5 5,5 90,5
MTMA 50-25-GC 50 25 UP 130-50 PS 130-95/E 9,0 6,5 106,5
MTMA 50-35-GC 35 UP 130-50 9,0 8,0 106,5
MTMA 70-35-GC 70 35 UP 130-70 11,0 8,0 106,5
MTMA 70-50-GC 50 UP 130-70 11,0 9,0 106,5
MTMA 95-50-GC 95 50 UP 130-95 12,5 9,0 109,4
MTMA 95-70-GC 70 UP 130-95 12,5 11,0 106,5
MTMA 120-70-GC 120 70 UP 130-120 PS 130-150/E 13,7 11,0 133,0
MTMA 120-95-GC 95 UP 130-120 13,7 12,5 133,0
MTMA 150-70-GC 150 70 UP 130-150 15,5 11,0 133,0
MTMA 150-95-GC 95 UP 130-150 15,5 12,5 134,4
MTMA 150-120-GC 120 UP 130-150 15,5 13,7 133,0
MTMA 185-120-GC 185 120 AU 130-240 UP 130-185 17,0 13,7 143,5
MTMA 185-150-GC 150 UP 130-185 17,0 15,5 143,5
MTMA 240-150-GC 240 150 UP 130-240 PS 130-240/E 19,5 15,5 143,5
MTMA 240-185-GC 185 UP 130-240 19,5 17,0 143,5
MTMAD 300-95-GC 300 95 UP 130-300 HT 131-UC, RHU 131-C, B 131-UC, HT120, HT131-C, RHC 131, ECW-H3D 22,5 12,5 144,5
MTMAD 300-150-GC 150 UP 130-300 22,5 15,5 144,5
MTMAD 300-185-GC 185 UP 130-300 22,5 17,0 144,5
MTMAD 300-240-GC 240 UP 130-300 22,5 19,5 144,5
MTMA 400-240-GC 400 240 ECW-H3D, RHU 230-630 26,0 19,5 218,0
MTMA 400-300-GC 300 ECW-H3D, RHU 230-630 26,0 23,3 218,0
MTMA 500-300-GC 500 300 ECW-H3D, RHU 230-630 29,1 23,3 218,5
MTMA 500-400-GC 400 ECW-H3D, RHU 230-630 29,1 26,0 218,5

 

➡ See also aluminium cable lugs and copper cable lugs for 11kV-33kV medium and high voltage cable connections and terminations.

Aluminium Cable Splice Connectors LV MV HV 11kV-33kV - Dimensions

Aluminium Cable Splice Connectors LV MV HV 11kV-33kV – Dimensions

➡ T&D are Main Distributors for Cembre stocking a complete range of cable cutting and crimping tools.Cembre - Cable Crimpers Cutters Lugs Splices

Contact T&D to discuss crimping cables at MV-HV, including 11kV-33kV, to ensure correct Cembre tool, lug/splice and die set selection – visit battery crimping tools for repetitive crimping of cables without strain injury or worker fatigue.

Full range of battery cable cutting tools also available.