Fibre Optic Cable Duct Seals FttH – Filoform MD1-FttH 1x 14-20mm
Fibre Optic Cable Duct Seals FttH – Filoform MD1-FttH 1x 14-20mm
Sealing Cables
Fibre Optic Duct Seal
Filoform MD1-FttH is a duct sealing system designed for gas and watertight sealing of FttH home entries with micro ducts and cables up to Ø40mm. The diameter of the drilled hole needs to be at least Ø32mm wide and max. Ø 40mm.
The fibre optic sealing cap of the Filoform MD1-FttH can be applied to the wall by using the special anchoring pin removing the need for additional holes to secure the cap with screws.
A gas and watertight seal is created with use of Filoform expanding PU resin type 2566. After injecting the resin it will expand and fully cure intro a strong and durable cable duct seal. Any irregularities or damage to wall will be restored with the resin.
Filoform MD1-FttH 1x 14-20mm
Fibre Optic Cable Duct Seals FttH
Features & Benefits
- Universal, suitable for fibre optic micro ducts and cables up to Ø12mm
- Expansion along the borehole and on the outer wall guarantees an excellent seal
- Tested 1.0 bar gas and watertight duct seal
- Quick installation in minutes, no special tools required
- No extensive core drilling necessary
- Also suitable for angled penetrations
- Suitable for sealing of drilled holes in the most common wall types with waterproofing according to DIN 18195 T4
- Complies with DIN 18322 underground cable laying works: cable and conduit entries into buildings are to be made watertight and gastight
- High mechanical cable seal strength, resists ground movement, shocks and vibrations
- Supplied as one complete kit for sealing of one house connection
- Over 30 years of practical experience, installed in many Telecom / FO networks
- For Power Cable Sealing see Filoform Filoseal HD
Filoform MD1-FttH 1x 14-20mm
Fibre Optic Cable Duct Seals FttH – Filoform MD1-FttH 1x 4-12mm
Technical Specification
Duct Seal System Properties | Unit | Value |
Start time expansion | seconds | 20 |
End time expansion | minutes | 2 |
Curing time | minutes | 5 |
Compressive strength | N / cm² | > 60 |
Density | kg / m³ | 100 |
Gastightness | bar | > 1,0 |
Watertightness | m water column | > 10 |
Volume consistency in water | cube 10 x 10cm | no change |
temperature Cycles, -20°C tot +40°C | 10 consecutive cycles | no leakage |
Vibration test 10 Hz/amplitude 3mm | 240 hours | no leakage |
axial tensile force | diameter x 10 N | no leakage |
Pull out strength FttH cable / microduct | N | > 400 |
Chemical resistance | ||
0,1N Na₂SO₄ | 30 days | no degradation |
0,1N NaCl | 30 days | no degradation |
0,1N H₂SO₄ | 30 days | no degradation |
0,1N NaOH | 30 days | no degradation |
Diesel | 30 days | no degradation |
Gasoline | 30 days | no degradation |
Resistance | ||
Molds | good | |
Rodents | good | |
Volume after expansion | ||
Content 25ml | ml | 250 |
Filoform MD1-FttH – Product Specification
Filoform Part Ref | Cable Duct Seal Description | Maximum Duct Diameter (mm) | Maximum Cable Diameter In The Duct (mm) | Order Unit |
---|---|---|---|---|
80219 | MD1-FttH 1×4-12mm | Ø 16-20 | 4-12 | per piece |
80219.3 | SET – MD1-FttH + FttH entry 90° for 1×4-8mm | Ø 16-20 | 4-8 | per set |
80219.6 | SET – MD1-FttH + FttH entry 90° for 1×10-12mm | Ø 22-25 | 10-12 | per set |
80221 | MD1-FttH 1×14-20mm | Ø 32-40 | 14-20 | per piece |
Duct Sealing System Set Contents
MD1-FttH 1×4-12mm | MD1-FttH 1×14-20mm |
|
|
SET – MD1-FttH + FttH entry 90° for 1×4-8mm | SET – MD1-FttH + FttH entry 90° for 1×10-12mm |
|
|
Filoform MD1-FttH 1x 4-12mm
Sealing Cable Ducts With Roxtec – cable sealing modules consist of two halves with removable layers and a centre core which is removed to permit cable or pipe installation in medium/high voltage substations, hazardous areas and electrical infrastructure