Fibre Optic Cable Duct Seals FttH – Filoform MD1-FttH 1x 4-12mm

Fibre Optic Cable Duct Seals FttH - Filoform MD1-FttH 1x 4-12mm

Fibre Optic Cable Duct Seals FttH – Filoform MD1-FttH 1x 4-12mm

Filoform MD1-FttH is a duct sealing system designed for gas and watertight sealing of FttH home entries with micro ducts and cables up to Ø12mm. The diameter of the drilled hole needs to be at least Ø16mm wide and max. Ø 20mm.

The fibre optic sealing cap of the Filoform MD1-FttH can be applied to the wall by using the special anchoring pin removing the need for additional holes to secure the cap with screws.

A gas and watertight seal is created with use of Filoform expanding PU resin type 2234. After injecting the resin it will expand and fully cure intro a strong and durable cable duct seal. Any irregularities or damage to wall will be restored with the resin.

Filoform MD1-FttH 1x 4-12mm

Filoform MD1-FttH 1x 4-12mm

Fibre Optic Cable Duct Seals FttH

Features & Benefits

  • Universal, suitable for fibre optic micro ducts and cables up to Ø12mm
  • Expansion along the borehole and on the outer wall guarantees an excellent seal
  • Tested 1.0 bar gas and watertight duct seal
  • Quick installation in minutes, no special tools required
  • No extensive core drilling necessary
  • Also suitable for angled penetrations
  • Suitable for sealing of drilled holes in the most common wall types with waterproofing according to DIN 18195 T4
  • Complies with DIN 18322 underground cable laying works: cable and conduit entries into buildings are to be made watertight and gastight
  • High mechanical cable seal strength, resists ground movement, shocks and vibrations
  • Supplied as one complete kit for sealing of one house connection
  • Over 30 years of practical experience, installed in many Telecom / FO networks
Filoform MD1-FttH 1x 4-12mm - Drawing

Filoform MD1-FttH 1x 4-12mm – Drawing

Fibre Optic Cable Duct Seals FttH – Filoform MD1-FttH 1x 4-12mm

Technical Specification

Duct Seal System PropertiesUnitValue
Start time expansionseconds20
End time expansionminutes2
Curing timeminutes5
Compressive strengthN / cm²> 60
Densitykg / m³100
Gastightnessbar> 1,0
Watertightnessm water column> 10
Volume consistency in watercube 10 x 10cmno change
temperature Cycles, -20°C tot +40°C10 consecutive cyclesno leakage
Vibration test 10 Hz/amplitude 3mm240 hoursno leakage
axial tensile forcediameter x 10 Nno leakage
Pull out strenght FttH cable / microductN> 400
Chemical resistance
0,1N Na₂SO₄30 daysno degradation
0,1N NaCl30 daysno degradation
0,1N H₂SO₄30 daysno degradation
0,1N NaOH30 daysno degradation
Diesel30 daysno degradation
Gasoline30 daysno degradation
Resistance
Moldsgood
Rodentsgood
Volume after expansion
Content 25mlml250

Filoform MD1-FttH 1x 4-12mm – Product Specification

Filoform Part RefCable Duct Seal DescriptionMaximum Duct Diameter (mm)Maximum Cable Diameter In The Duct (mm)Order Unit
80219UKMD1-FttH 1×4-12mmØ 16-204-12per piece

 

Filoform MD1-FttH 1x 4-12mm

Filoform MD1-FttH 1x 4-12mm

Sealing Cables Ducts

Sealing Cable Ducts With Roxtec – cable sealing modules consist of two halves with removable layers and a centre core which is removed to permit cable or pipe installation in medium/high voltage substations, hazardous areas and electrical infrastructure

Cable & Duct Sealing Transit Frames – T&D Approved Roxtec Distributor

Cable & Duct Sealing Transit Frames – T&D Approved Roxtec Distributor