Cembre A10-M10

Cembre A10-M10

Cembre A10-M10

50sqmm Cable Lugs

Cembre A10-M10 low voltage cable lugs terminate 50sqmm copper conductors.

Install Using Crimping Tool: Cembre HT131-C , Cembre HT51

Typical Cable Lug Applications: Low Voltage (Up to 3.3kV)

Cembre A10-M10 is a 50sqmm copper tube crimp lug with M8 stud – short circuit tested up to 11kV for medium/high voltage termination of stranded copper cables with 50sqmm conductor cross section in dry indoor locations and compatible with both Cold Shrink and heat shrink terminations.

A10-M10

• Manufacturer: Cembre
• Primary Application: Termination Crimp LV Cables
• Secondary Application: Termination Crimp MV Cables 11kV
• Conductor Size Stranded Copper: 50sqmm
• Ø Stud Size: 10mm
• Internal Diameter Øi: 10.0mm
• Width Of Lug Palm B: 20.0mm
• Lug Hole Centres M: 11.5mm
• Lug Hole Centres N: 9.5mm
• Cable Crimp Lug Length L: 44.5mm
• Dia d: 10.5mm
• Low Voltage Cable Lugs
• Cembre A10-M 50sqmm Cable Lugs

Install using Cembre Tools – complete range of ratchet, hydraulic and batter operated crimping tools are available.

• See also – Cembre Crimping Tools 
• Full range – Cable Crimps, Lugs & Connectors

HV High Voltage Cable Lugs – Cembre single/double hole, angled and stalk connectors for 11kV-33kV cables

Data Sheets

• LV Low Voltage Cable Lugs 600/1000V (11kV Dry Indoor Applications) – Instructions
  Download
• LV Low Voltage Cable Lugs 600/1000V (11kV Dry Indoor Applications) – Installation
  Download