Galvanised Steel Earth Rods

Earth Rods – Galvanised Steel

Earth Rods

Mild Steel Galvanised To BS EN ISO 1461

Cross profile galvanised steel earth rods are ideally suited for installation in earth termination systems of temporary structures such as antennas or distribution boards on construction sites.

Earth rods manufactured from galvanised steel have a male thread at the top and a female thread at the bottom enabling rods to be joined together and is galvanised to EN ISO 1461.

The steel earthing rod is supplied as a standard set complete with toughened steel driving head, hardened steel driving spike and galvanised steel wire rope grip.

AN Wallis x-shaped earth rods are manufactured in steel with a minimum average zinc coating of 70µm – each galvanised steel earth rod has a splice plate with three connecting holes.

Galvanised Steel Earth Rods

Selection Table

AN Wallis Part Number	Nominal Size	Earth Rod Length	Thread Size (BSF)	Rod Diameter	Length 1	Length 2	Unit Weight	Pack Quantity
ERG 112	5/8″	1200mm	3/8″	16.5 – 17mm	30mm	25mm	2.10kg	5

The AN Walls earth rod sets are manufactured from galvanised steel and include rod driving head, rod spike and steel wire rope grip.

Cross Profile Galvanised Steel Earth Rods

Cross profile galvanised steel earth rods are ideally suited for installation in earth termination systems of temporary structures such as antennas or distribution boards on construction sites.

X-shaped rods are manufactured in steel with a minimum average zinc coating of 70μm. Each earth rod has a splice plate with three connecting holes.

Section mm	L mm	Splice Plate Holes No. x 8mm	Unit Weight kg	Pack Quantity	AN Wallis Part Number
50 x 50 x 3	1000	3 x 11	2.34	5	ERX 310
	1500		3.51		ERX 315
	2000		4.61		ERX 320
	2500		5.85		ERX 325
	3000		7.03		ERX 330
50 x 50 x 5	1000	3 x 11	3.90	5	ERX 510
	1500		5.85		ERX 515
	2000		7.80		ERX 520
	2500		9.75		ERX 525
	3000		11.75		ERX 530

Material: Carbon steel galvanised to BS EN ISO 1461

Cross Profile Galvanised Steel Earth Rods – Dimensions

AN Wallis offer a range of earth rods ➡ Stainless Steel Earth Rods | Copperbond Earth Rods | Solid Copper Earth Rods

Earth Rods – Galvanised Steel – Dimensions

SUBSTATIONS LV MV HV

T&D supply DNO’s, IDNO’s, ICP’s and utility power contractors involved in the construction and maintenance of MV-HV substations – this includes duct seals for underground cable duct, cable cleats to support cables, earth tapes for substation earthing, underground cable protection and a full range of MV-HV cable joints, terminations and connectors in heat shrink, cold shrink and push-on technologies for XLPE, PILC, oil and gas insulated cables.