Ellis Atlas AR2-A12 Cable Cleats

Ellis Atlas AR2-A12 Cable Cleats

Ellis Cable Cleats

Single Cable Cleats

Cable Cleat Maximum Short Circuit Test Level 112kA – Cleat Spacing 750mm

Ellis AR2-A12 Atlas Cable Cleats are manufactured from galvanised or stainless steel and are ideal for single cable applications where the highest level of short circuit withstand are required – suitable for LV (Low Voltage), MV (Medium Voltage) and HV (High Voltage) power cable circuits.

Ellis Patents AR2-A12 cable cleats are suitable for securing single-way power cables between 41-74mm overall cable diameter – to protect and cushion LV-HV cables during short circuit conditions the Ellis Atlas cleat range is supplied integral with Low Smoke & Zero Halogen polymeric pads.

The cleats are available in a range of sizes with range taking ability to suit cables in single or trefoil formation.

Atlas Cable Cleats form part of the Ellis Patents range of single cable cleats – also available in galvanised or stainless steel Atlas trefoil cable cleats for cable diameters ranging from 24-102mm.

Ellis Cable Cleat AR2-A12

Technical Specification

  • Cable Cleat Diameter Min 41mm
  • Cable Cleat Diameter Max 74mm
Ellis Atlas AR2-A12 Cable Cleats

Ellis AR2-A12 Atlas Cleat 41-74mm

Ellis patents AR2-A12 Cleat Dimensions

Two Bolt Cleat

  • Width 170mm
  • Height 129mm
  • Cleat Depth 54mm
  • P 150mm
  • 2 x M 10 Cleat Fixing Holes
  • Weight 930g
  • Cable Cleat Order Code: AR2-A12-TB

Single Bolt Cleat

  • Width 144mm
  • Height 136mm
  • Cleat Depth 54mm
  • 1 x M 10 Cleat Fixing Holes
  • Weight 930g
  • Cable Cleat Order Code: AR2-A12-SB

Framing Channel

  • Width 144mm
  • Height 131mm
  • Cleat Depth 54mm
  • 1 x M 10 Cleat Fixing Holes
  • Weight 930g
  • Cable Cleat Order Code: AR2-A12-FC

Single Cable Cleat Selection Table

Specification details for Ellis Patents Atlas AR2-A12 cable cleat for single cable applications – the unique design of these cable cleats provides a choice of one bolt, two bolt or framing channel fixing options.

Atlas Cable Cleat Part Number Cable Dia Range (mm) Dimensions Weight (g)
Two Bolt Single Bolt Framing Channel
W (mm) H (mm) C (mm) P (mm) Fixing Holes W (mm) H (mm) C (mm) Fixing Hole W (mm) H (mm) C (mm) Fixing Hole
AR2-A12-* 41-47 170 129 54 150 2xM10 144 136 54 1xM10 144 131 54 1xM10 950

*Dimension ‘C’ is the cleat depth – not shown on drawing above. To order please add fixing suffix: Two Bolt-TB, Single Bolt-SB, Framing Cleat-FC

Ellis Atlas AR2-A12 Cable Cleats - Dimensions

Ellis Atlas AR2-A12 Cable Cleats – Dimensions

 

Atlas Cable Cleats – Installation Instructions

Installation instructions for single way cables using Alpha cleats manufactured by Ellis Patents:

Position the cable clamp and fixing (not supplied) onto the support structure Install Cable Locate the other half of the cable clamp Do not over tighten the cleat
1. Position the cable clamp and fixing (not supplied) onto the support structure 2. Install LV MV HV cable 3. Locate the other half of the cable clamp. Secure with a nut and washer (not supplied) to the support structure and tighten the cable cleat 4. IMPORTANT: Do not over tighten the cleat. The cleat should secure the cable but does not need to be so tight that the cable bulges at either side of the cleat

WARNING – to prevent eddy currents and heating of the cable cleat the top tensioning bolt is made of stainless steel. Ensure that only this bolt is used and that bridging cannot take place. All Atlas cable cleats are supplied with two M12 nuts, bolts and washers.

Ellis Patents

See Ellis Patents for further details about cable cleats for LV-HV cable support and retention.

Data Sheets