Cold Shrink Outdoor Cable Terminations 11kV 24kV Euromold OTK

View Sub Products

Cold Shrink Indoor Cable Terminations 11kV 24kV Euromold OTK

Cable Termination | Cold Shrink | Single Core | 11kV 24kV

Euromold OTK are single core cold shrink cable terminations for use outdoor specified to terminate and connect medium/high voltage cables in the following voltage classes – Cold Shrinkable terminations require no “hot-working” for safe use in potentially explosive atmospheres and hazardous area locations.

  • 6/10 (12) kV
  • 6.35/11 (12) kV
  • 8.7/15 (17.5) kV
  • 12/20 (24) kV
  • 12.7/22 (24) kV

Euromold OTK cold shrink cable terminations have a kit of 3 terminations for use outdoors in areas exposed to sunshine and other weather conditions. Suitable for connecting polymeric insulated cable to equipment and for the outdoor terminating on to overhead lines or busbars.

  • Voltage Classes – 12kV 24kV Maximum
  • Terminate & Connect Cables – Polymeric XLPE EPR
  • Single or 3 Core – Single Core
  • Cable Screen – Suit Both Copper Wire & Copper Tape Screen (Order Euromold MT Kit)
  • Location – Outdoor Cable Termination
  • Conductor Cross Section Sizes – 50-1000sqmm
  • Applications – MV HV Switchgear, Transformers, Motors
  • Also  Indoor Cold Shrink Terminations 11kV 24kV

➡ See complete range of Nexans Euromold Cable Terminations

Euromold OTK Specification

The following tables show the complete range of Cold Shrinkable cable terminations manufactured by Nexans suitable for the termination of outdoor single core cables:

Nexans Cold Shrink Cable Terminations Voltage
Um
(kV)
Creepage
Distance
A-B
(mm)
Strike
Distance L
(mm)
Number
Of Sheds
Fig.
No.
Diameter Over
Core Insulation
(mm)
Conductor Sizes (sqmm)
min max min max
OTK 212 11kV 12kV 420 300mm 3 1 14 33 50sqmm 400sqmm
OTK 312 11kV 12kV 890 650mm 6 2 30 50 400sqmm 1000sqmm
OTK 224 20kV 24kV 600 400mm 5 3 14 33 25sqmm 240sqmm
OTK 324 20kV 24kV 890 650mm 6 4 30 50 300sqmm 800sqmm
Cold Shrink Outdoor Cable Terminations 11kV 24kV Euromold OTK - Design

Cold Shrink Outdoor Cable Terminations 11kV 24kV Euromold OTK – Design

Outdoor cold shrink cable termination comprising:

  1. Cable lug (not included in the standard kit) – both crimp cable lugs and shearbolt lugs are suitable
  2. Water sealing mastic
  3. Sheds which be installed upwards or down
  4. Silicone tube with sheds
  5. Silicone cold shrink tube
  6. Stress control mastic
  7. Conductive EPDM ring

EUROMOLD OTK selection table

For OUTdoor Cable Terminations

Select the Euromold part number corresponding to both the system voltage and the cable insulation diameter in mm.

The complete Euromold OTK termination kit comprises of the following components water sealing mastic and installation instructions.

Kit Contents For Euromold OTK Terminations

Kit Contents For Euromold OTK Cold Shrink Terminations

 

Euromold OTK Cold Shrink Cable Terminations Voltage
Um
(kV)
Diameter Over
Core Insulation
(mm)
Conductor Sizes (sqmm)
min max min max
3 x OTK 212 11kV 12kV 14 33 50sqmm 400sqmm
3 x OITK 312 11kV 12kV 30 50 400sqmm 1000sqmm
3 x OTK 224 11kV 24kV 14 33 25sqmm 240sqmm
3 x OTK 324 11kV 24kV 30 50 300sqmm 800sqmm

 

Euromold ITK - Cable Lugs

All commercialised European standard cable lugs can be used. Cable lugs should be within the dimensions specified (not applicable for Nexans OTK 312 and OTK 324).

Euromold

Euromold | Connect | Joint | Terminate MV HV Cables – view our complete range of HV Joints & Terminations in heat shrink, cold shrink, push-on and plug-in versions.