0.6/3.3kV Heat Shrink Joints To Suit LV Cables Type XLPE/SWA/PVC 240-300sqmm – SPS SPA 240-300 –
Heat shrink cable joints are suitable for use with wire armoured or braided PVC, XLPE and EPR unscreened cables with a cable conductor range of 240-300sqmm for voltages up to 3.3kV.
The cable joint kit contents are as follows: adhesive lined heat shrink connector insulation tubes, heavy duty armour cage (copper mesh on the smaller cable joints), armour support rings, armour clamps and an outer thick wall adhesive lined heat shrink tube.
- Cable Joint Type – Heat Shrink
- Cable Voltage – 0.6/3.3kV
- Conductors – 240sqmm, 300sqmm
- Cable Type – XLPE/SWA/PVC or EPR/Braided
- Heat Shrink Joint Kit Order Code – SPS SPA 240-300-1
Heat Shrink Joints to Suit Low Voltage Cables
Features & Benefits
- Meets the cable jointing requirements of BS6910 part 1, Test Report available
- Unlimited shelf life
- Slim profile – can be installed into cable duct, vertically, trenched underground and onto cable tray
- Allows for immediate backfill and re-energisation
- Zero Halogen | Fire Resistant
- Cold Shrink Cable Joints LV
Heat Shrink Joints To Suit XLPE/AWA/PVC | ||
SPS Part Number | Cable Range | Voltage |
SPA 1.5-2.5 – | 1.5-2.5sqmm | 600/1000V |
SPA 4-6 – | 4-6sqmm | 600/1000V |
SPA 10-16 – | 10-16sqmm | 600/1000V |
SPA 25-50 – | 25-50sqmm | 0.6/3.3kV |
SPA 70-95 – | 70-95sqmm | 0.6/3.3kV |
SPA 120-185 – | 120-185sqmm | 0.6/3.3kV |
SPA 240-300 – | 240-300sqmm | 0.6/3.3kV |
Note: To denote number of cores, add number to end of reference.
Example: 12 core 2.5sqmm = SPA 1.5-2.5-12
For non armoured cables, delete the letter A, for shipwiring cables, add letters SW after SPA, for hydrocarbon resistant joints add letters HC after SPA