0.6/3.3kV Heat Shrink Joints To Suit LV Cables Type XLPE/SWA/PVC 70-95sqmm – SPS SPA 70-95 –

Heat Shrink Joints Single Core XLPE

0.6/3.3kV Heat Shrink Joints To Suit LV Cables Type XLPE/SWA/PVC 70-95sqmm

Heat shrink cable joints are suitable for use with wire armoured or braided PVC, XLPE and EPR unscreened cables with a cable conductor range of 70-95sqmm for voltages up to 3.3kV.

The cable joint kit contents are as follows: adhesive lined heat shrink connector insulation tubes, heavy duty armour cage (copper mesh on the smaller cable joints), armour support rings, armour clamps and an outer thick wall adhesive lined heat shrink tube.

  • Cable Joint Type – Heat Shrink
  • Cable Voltage – 0.6/3.3kV
  • Conductors – 70sqmm, 95sqmm
  • Cable Type – XLPE/SWA/PVC or EPR/Braided
  • Heat Shrink Joint Kit Order Code – SPS SPA 70-95 –

Heat Shrink Joints to Suit Low Voltage Cables

Features & Benefits

  • Meets the cable jointing requirements of BS6910 part 1, Test Report available
  • Unlimited shelf life
  • Slim profile – can be installed into cable duct, vertically, trenched underground and onto cable tray
  • Allows for immediate backfill and re-energisation
  • Zero Halogen | Fire Resistant
  • Cold Shrink Cable Joints LV
Heat Shrink Joints To Suit XLPE/AWA/PVC
SPS Part Number Cable Range  Voltage
SPA 1.5-2.5 – 1.5-2.5sqmm 600/1000V
SPA 4-6 – 4-6sqmm 600/1000V
SPA 10-16 – 10-16sqmm 600/1000V
SPA 25-50 – 25-50sqmm 0.6/3.3kV
SPA 70-95 – 70-95sqmm 0.6/3.3kV
SPA 120-185 – 120-185sqmm 0.6/3.3kV
SPA 240-300 – 240-300sqmm 0.6/3.3kV


Note: To denote number of cores, add number to end of reference.
Example: 12 core 2.5sqmm = SPA 1.5-2.5-12
For non armoured cables, delete the letter A, for shipwiring cables, add letters SW after SPA, for hydrocarbon resistant joints add letters HC after SPA

Heat Shrink Cable Terminations 6.6kV 11kV 33kV

6.6kV 11kV 33kV Cable Joints & Terminations – heat shrink provides safe and reliable cable connections, splices and joints for both LV and MV-HV cables

Data Sheets