Low Voltage LV Industrial Cable Joints – Prysmian JBRCC

View Sub Products

Low Voltage LV Industrial Cable Joints – Prysmian JBRCC

Low Voltage LV Industrial Cable Joints – Prysmian JBRCC

Prysmian JBRCC industrial branch cable joints are used for LV cables with copper & aluminium conductors ranging from 1.5sqmm to 300sqmm and have transparent vacuum formed shells which offer greater working dimensions & interlocking flange seals.

JBRCC low voltage cable joints include low hazard isocynate free JEM resin which has extremely low viscosity and enhanced adhesion and are designed to allow use with compression or mechanical connectors.

T&D can offer the full range of Prysmian cable joints for low voltage industrial cable jointing applications.

Prysmian JBRCC Cable Joints

Technical Data

  • Low Voltage Branch Joints for 600/1000 Volt SWA cables to BS5467, BS6346 and IEC 502 – with Polymeric Insulation, aluminium or copper conductors.
  • Tested & Approved to BS EN 50393 & ENA ER C81
  • Includes Mechanical connectors (4 cores) requiring no special tooling and constant Force Spring Armour Bonds Included

Prysmian JEM Resin Features & Benefits

  • Easier resin mixing by the cable jointer in “Twin Pack” totally enclosed mixing in a clear laminate sachet.
  • Extremely low mix viscosity allows void free cable joint filling.
  • JEM Resin is insensitive to moisture and will cure under water.
  • Enhanced adhesion to XLPE, MDPE, PVC & lead covered cables.
  • High flash point, non-flammable liquid – no special storage or transport requirements.
  • Not classified as irritating to the skin or eyes.
  • Does not cause skin sensitisation.

CABLE JOINTS Dimensions

Prysmian Cable Joint Reference Dimensions
A B C Minimal Box Entry ∅ (D) Maximum Box Entry ∅ (E)
JBRCC6 240mm 125mm 75mm 12mm 22mm
JBRCC16 345mm 160mm 95mm 20mm 35mm
JBRCC35 435mm 175mm 100mm 24mm 40mm
JBRCC95 650mm 210mm 190mm 27mm 51mm
JBRCC185 870mm 250mm 230mm 40mm 65mm
JBRCC300 1020mm 300mm 310mm 55mm 80mm

Note: Prysmian JBRCC joints are provided without connectors, compression connectors or mechanical connectors can be provided separately.

➡ Prysmian Cable LV MV HV Accessories | Cable Glands |  Cable Cleats | 11kV Terminations Heat Shrink

Prysmian JBRCC LV Cable Joints - Dimensions

Prysmian JBRCC LV Cable Joints – Dimensions

LOW VOLTAGE CABLE JOINTS Selection Table
Nominal Area of Conductor Two Core Ref Three Core Ref Four Core Ref
1.5sqmm JBRCC6 JBRCC6 JBRCC6
2.5sqmm JBRCC6 JBRCC6 JBRCC6
4sqmm JBRCC6 JBRCC6 JBRCC6
6sqmm JBRCC6 JBRCC6 JBRCC6
10sqmm JBRCC6 JBRCC16 JBRCC16
16sqmm JBRCC16 JBRCC16 JBRCC16
25sqmm JBRCC16 JBRCC16 JBRCC35
35sqmm JBRCC35 JBRCC35 JBRCC35
50sqmm JBRCC95 JBRCC95 JBRCC95
70sqmm JBRCC95 JBRCC95 JBRCC95
95sqmm JBRCC95 JBRCC95 JBRCC95
120sqmm JBRCC185 JBRCC185 JBRCC185
150sqmm JBRCC185 JBRCC185 JBRCC185
185sqmm JBRCC185 JBRCC185 JBRCC185
240sqmm JBRCC300 JBRCC300 JBRCC300
300sqmm JBRCC300 JBRCC300 JBRCC300

➡ For jointing all types of XLPE, EPR and PILC power, control and instrumentation cables in straight, branch or transition arrangement including zero halogen, fire resistant and hazardous areas see Resin Cable Joints