Klauke PK252 | Hydraulic Cable Crimping Head
Klauke PK252 | Hydraulic Cable Crimping Head
Klauke PK252
Crimping Tools
The Klauke PK252 is a battery powered cable crimping tool head that has a large crimping range for cable lugs and connectors up to 625sqmm – the crimping tool is suitable for 25-series interchangeable crimping dies for wide crimping according to DIN 48083, sheet 3.
The PK252 crimping head from Klauke used for connecting to hydraulic pumps with 700 bar operating pressure for optimum crimping results.
Klauke crimping tools are available with Bosch or Makita battery system.
Battery powered hydraulic crimping tool head with quick coupling, 360º rotation when not pressurised.
âž¡ See also:Â Battery Operated Cable Cutting Tools
Klauke PK252
TECHNICAL SPECIFICATION for Klauke PK252
The following table outlines the performance specification of the Klauke PK252 crimping tool head:
| Cable crimping force | 250Â kN |
| Stroke | 20 mm |
| Crimping tool range | 16-625sqmm |
| Operating pressure | max. 700Â bar |
| Length | 335mm |
| Weight | 5.3 kg |
| Charging time | 15 min |
| Weight incl. battery | 3.0 kg |
| Ambient temperature | -10°C to +40°C |
BATTERY POWERED CABLE CRIMPING TOOL – DIES
The following tables show the correct die sets to use for installing cable lugs, connectors, joints and end sleeves using Klauke PK252 crimping tool head:
| Tool Suitable for | Cable Crimping range | Dies |
|---|---|---|
| Copper tubular cable lugs and connectors | ||
| Copper tubular cable lugs and connectors, standard design, tubular cable lugs for switch cabinet connections | 150 – 400sqmm | Crimping dies HR 25 |
| Tubular cable lugs and connectors for fine stranded conductors | 185 – 300sqmm | Crimping dies HF 25 |
| Tool Suitable for | Cable Crimping range | Dies |
|---|---|---|
| Copper compression cable lugs and connectors to DIN – CU | ||
| Copper compression cable lugs (DIN 46235) and connectors (DIN 46267, part 1) acc. to DIN | 150 – 625sqmm | Crimping dies HD 25 |
| Tool Suitable for | Cable Crimping range |
| Solderless Terminals, Connectors and Pin Terminals to DIN – CU | |
| Solderless terminals (DIN 46234), pin terminals (DIN 46230) and solderless connectors (DIN 46341) according to DIN – Cu | 150 – 240 |
| Insulated solderless terminals and pin terminals | 120 – 150 |
| Tool Suitable for | Cable Crimping range | Dies |
|---|---|---|
| Sleeves for compacted conductors and sector-shaped conductors, copper | ||
| Pre-rounding dies for sector-shaped Al and Cu conductors, 3-core and 4-core sector-shaped conductors | 10 sm – 300 se / 500 sm | Crimping dies HRU 25 |
| Tool Suitable for | Cable Crimping range | Dies |
|---|---|---|
| Compression cable lugs and connectors to DIN | ||
| Compression cable lugs and connectors according to DIN – Al | 400 – 500sqmm | Crimping dies HA 25 |
| Compression joints for full-tension connections of Aldrey-conductors according to DIN EN 50182, Al-conductors DIN EN 50182, 120 – 300 mm² | 240 – 300sqmm | – |
| Tool Suitable for | Cable Crimping Range | |
| Compression cable lugs and connectors – Al/CU | ||
| Aluminium side: HA25 crimping dies; copper side: HD25 crimping dies | 400-500 | |
| Tool Suitable for | Cable Crimping range | Dies |
|---|---|---|
| Clamps & Screw Connectors | ||
| Clamps, C-type | 16 – 185sqmm | Crimping dies HC 25 / HMC 25 |
| Clamps, H-type | 95sqmm-120sqmm | – |
Cable Tools
Should you require technical assistance to select the correct cable crimping or cable cutting tools please contact us.
Thorne & Derrick are Specialist Distributors of cable tools to enable the preparation of all LV MV HV cables prior to the installation of Joints, Terminations & Connectors – this includes Klauke, Cembre, Alroc and Boddingtons cable jointing tools for removal of cable sheath, screen and insulation on 11/33kV (MV) and 66kV/132kV (HV) power cables.
View the complete range of Cable Crimping & Cable Cutting Tools
