Single core 11kV heat shrink termination for medium or high voltage XLPE cables in indoor applications are designed to terminate polymeric insulated 11kV cables into air insulated switchgear and cable end boxes.
Single core 11kV cable termination kits are supplied with all the necessary components for 3 single core terminations:
3 core termination kits are supplied with all the necessary components for 1 three core terminations:
➡ Cable Terminations | Cold Shrink 11kV Termination | Heat Shrink 11kV Termination
The cables have been terminated using heat shrink cable terminations and bolted to the copper busbar using crimp or mechanical shearbolt 11kV cable lugs. The 11kV copper wire screens have been bundled and bonded to an earth point using brass type mechanical lugs.
Note the smooth and even completed finish of the anti-track heat shrink (coloured red) to the cable termination evidencing the subtle skill of the cable jointer to avoid over-heating or localised scorching to the heat shrink tubes by inconsistent application of the naked flame from the heat shrink gas torch.
Should you require any assistance with the selection or specification of heat shrink terminations or cable joints for medium/high voltage electrical cables and power systems please do not hesitate to contact us.
LV ♦ MV ♦ HV
T&D distribute the most extensive range of LV, MV & HV Cable Jointing, Terminating, Installation & Cable Pulling Equipment – we service UK and international clients working on underground cables, overhead lines, substations and electrical construction at LV, 11kV, 33kV and EHV transmission and distribution voltages.
LV – Low Voltage Cable Joints, Glands, Cleats, Lugs & Accessories (1000 Volts)
MV HV – Medium & High Voltage Cable Joints, Terminations & Connectors (11kV 33kV EHV)
Cable Laying – Underground Cable Covers, Ducting, Seals & Cable Pulling Equipment
T&D’s Power Blog covers: LV MV HV & EHV Transmission & Distribution, Substations, Switchgear, Cable Jointing & Termination, Cable Fault & Repair, Underground Cables.
Published 25 Mar 2026
klauke ekm60unv – universal cutting, crimping & punching tool The Klauke EKM 60 UNV is a versatile battery powered hydraulic universal tool engineered that can be used as a battery powered cable crimping tool and battery operated cable cutting tools that comes...
Published 18 Mar 2026
INDUSTRIAL LABEL PRINTING SOLUTIONS When clear, durable and professional identification is required across control panels, cable systems, production facilities and industrial installations, print quality, reliability and ease of use are critical. Cembre industrial label printers are designed to support...
