Duct Seal Max 250mm Cable Duct – FiloSeal+HD 280060
Cable Duct Seal Max 250mm Duct – FiloSeal+HD 280060
cable duct seal
250mm Cable Duct
Duct sealing systems like FiloSeal are suitable for sealing any cable configuration or pipes contained in a single duct. These duct seals manufactured by Filoform also allows easy re-entry of the seal to add or remove cables or pipes as required.
Filoform FiloSeal+HD 280060 is a re-enterable cable duct seal to suit maximum duct diameter of 250mm.
Filoseal+HD 280060 is a system for sealing ducts that is quick and easy to install and suitable for sealing LV (Low Voltage 600/1000V) and HV (High Voltage) substation cables, 11kV-33kV-66kV.
Duct sealing system FiloSeal+HD is an engineered universal solution for sealing larger heavy cables and pipes in ducts, boreholes or cable transit frames.
- Up to 2 bar Pressure Resistance
- 100Kg pulling force on the cables when sealed
- 10xd at 45º, with 1 bar pressure bending test
- WIMES & Utility UK DNO Approved | DSEAR & ATEX Compliant
- Contact us to discuss sealing material calculations for LV MV HV applications including substation ducts with 11kV 33kV 66kV 132kV power cables – we can provide expert technical support by site survey and product training to ensure competent installation of all Filoform Filoseal Systems.
Duct Sealing System
Filoseal+HD 280060 Features
- Filoform Part Ref – Filoseal 280060
- Product Type – Cable Duct Seal FiloSeal+HD – 250mm
- Max Cable Duct Diameter (mm) – Ø 250 max
- Product Type – Filoform Filoseal+HD Duct Sealing System
- Pressure Resistant – 2 Bar
- Application – Seal Cable Ducts Against Water & Gas (Not Suitable For Fire)
- Also – Fire Resistant Cable Duct Seals
Filoform FiloSeal+HD 280060 kits are complete with backing and mastic to fill an empty duct of the quoted kit size.
| Density | 1.2 gr/cm³ | |
| Pressure | up to 2 bar | |
| Pulling Force | 100kg (1000 newtons) | |
| Bend Test | 10xd at 45º, with 1 bar pressure | |
| Flow | < 2mm | ISO 7390 |
| Colour | red-brown | |
| Skin over time (23C/55%RH) | ± 15 minutes | |
| Curing | 3 mm / 24 hours | |
| Hardness | 30 shore A | DIN 53505 |
| Elongation | 100% | DIN 53504 |
| Tensile strength | 0.8 N/mm² | DIN 53504 |
| Operating temperature | +5°C tot +40°C | |
| Temperature resistance | -40°C tot +120°C |
The below video shows the Filoform FiloSeal +HD duct sealing system that is able to seal large diameter heavy armoured power (Multicore XLPE SWA) and high voltage cables in ducts, bore holes or transit frames.
FiloSeal+HD Seals
Full Product Range Specification
| Filoform Part Ref | Filoseal Duct Seal Description | Maximum Cable Duct Diameter (mm) | Order Unit |
|---|---|---|---|
| 280010 | FiloSeal+HD – 75mm > 110mm | Ø 110 max. | per piece |
| 280020 | FiloSeal+HD – 125mm > 160mm | Ø 160 max. | per piece |
| 280030 | FiloSeal+HD – 180mm | Ø 180 max. | per piece |
| 280040 | FiloSeal+HD – 200mm | Ø 200 max. | per piece |
| 280050 | FiloSeal+HD – 225mm | Ø 225 max. | per piece |
| 280060 | FiloSeal+HD – 250mm | Ø 250 max. | per piece |
To be used in conjunction with the Filoseal+HD and Filoseal+HD FIRE, Filoform have created transit frames to retain a LV MV HV cable where the space or structure will not allow fitting of a seal into the structure itself.
FiloSeal+HD 280060 Cable Duct Seals
Filoform Filoseal+ HD – Duct Seal – Data SheetDownload
