Cembre A60-M20
Cembre A60-M20
Cembre A60-M20
300sqmm Cable Lugs
Cembre A60-M20 low voltage cable lugs terminate 300sqmm copper conductors.
Install Using Crimping Tool: Cembre HT131-C , Cembre HT51, Cembre B131-C
Typical Cable Lug Applications: Low Voltage (Up to 3.3kV)
Cembre A60-M20 is a 300sqmm copper tube crimp lug with M8 stud – short circuit tested up to 11kV for medium/high voltage termination of stranded copper cables with 300sqmm conductor cross section in dry indoor locations and compatible with both Cold Shrink and heat shrink terminations.
A60-M20
- Manufacturer: Cembre
- Primary Application: Termination Crimp LV Cables
- Secondary Application: Termination Crimp MV Cables 11kV
- Conductor Size Stranded Copper: 300sqmm
- Ø Stud Size: 20mm
- Internal Diameter Øi: 23.7mm
- Width Of Lug Palm B: 44.0mm
- Lug Hole Centres M: 24.0mm
- Lug Hole Centres N: 23.0mm
- Cable Crimp Lug Length L: 112.0mm
- Dia d: 21.0mm
- Low Voltage Cable Lugs
- Cembre A48-M 240sqmm Cable Lugs
Install using Cembre Tools – complete range of ratchet, hydraulic and batter operated crimping tools are available.
- See also – Cembre Crimping Tools
- Full range – Cable Crimps, Lugs & Connectors
HV High Voltage Cable Lugs – Cembre single/double hole, angled and stalk connectors for 11kV-33kV cables
LV Low Voltage Cable Lugs 600/1000V (11kV Dry Indoor Applications) – InstructionsDownload
