Home > Blog > Alroc ASCR1 Jointers Tool Used To Remove Bonded Semicon From MV HV Cables

Alroc ASCR1 Jointers Tool Used To Remove Bonded Semicon From MV HV Cables

Published 24 Apr 2018

  • uploaded by Chris Dodds T&D Sales & Marketing Manager 

The Video kindly contributed by Watkins & Jacomb CPC shows the cable jointer using Alroc tools to effectively strip and remove the bonded semicon screen from the XLPE insulated 11kV cable prior to installing heat shrink cable terminations.

Alroc ASC R1 | ASC R2 Tool

The Alroc ASC cable tool removes the bonded semi-conductor from MV and HV cables and creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.

âž¡ View the complete range of cable jointing tools for the removing of sheath, insulation and semicon screen from medium/high/extra high voltage power cables.

Alroc ASCR1

Cable Tools

Cable Tool Model Alroc ASCR1 Alroc ASCR2
Semi Conductor Diameter 14 – 44mm 20 – 50mm
Cable Conductor Cross Section Area (CSA) 25 – 240sqmm 50 – 630sqmm
Tool Length 205mm 220mm
Width 110mm 120mm
Height 135mm 135mm
Weight 620g 800g

 

Video Contributed By: Watkins and Jacomb Construction Power & Consultancy. WJCPC are specialist LV HV Cable Termination & Jointing contractors with over 20 years experience in the High Voltage Electrical Industry covering the utilities, renewable energy, rail, data centre and general industry sectors – UKPN competent for LV & HV Termination and Jointing Of Cables, Confined Spaces, Substation Entry and Cable Fault Finding.

See also  ➡

Watkins and Jacomb Construction Power & Consultancy

Thorne & Derrick

Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV 

MV HV Cables 11kV 33kV

MV HV Cables 11kV 33kV – Cable Joints, Terminations & Connections

Further Reading