Cable Terminations 11kV 33kV | Single & 3 Core | Medium & High Voltage Cables MV HV
Nexans SREI are single core heat shrink cable terminations for use indoor and specified to terminate and connect medium/high voltage cables in the following voltage classes:
Heat shrinkable 11kV-33kV Nexans single-core termination kits, suitable for medium voltage polymeric (XLPE and EPR) insulated cables within an indoor environment i.e. air-insulated termination chambers and cable termination end-boxes.
11kV Terminations Single Core XLPE EPR Heat Shrink Cable Terminations
The following tables enable the selection of indoor cable terminations using Heat Shrinkable technology manufactured by Nexans:
| Nexans Order Code | Cable Voltage | Conductor Range – Single Core Cables | Cable Termination Tails |
| SREI 12 16-25 | 11kV | 16, 25sqmm | 650mm |
| SREI 12 35-95 | 11kV | 35, 50, 70 95sqmm | 650mm |
| SREI 12 120-240 | 11kV | 120, 150, 185, 240sqmm | 650mm |
| SREI 12 240-500 | 11kV | 240, 300, 400, 500sqmm | 650mm |
| SREI 12 400-630 | 11kV | 400, 500, 630sqmm | 650mm |
| SREI 12 630-800 | 11kV | 630-800sqmm | 650mm |
11kV Cables – Copper Wire v Copper Tape Screen Termination
Thorne & Derrick distribute the complete range of medium/high voltage electrical equipment manufactured by Nexans – this includes Euromold bushings for use with oil fluid or gas insulated switchgear or transformers and associated screened separable connectors according to both IEC (Euromold) and IEEE (Elastimold) for the termination, connect+disconnect of MV-HV cables onto power distribution systems. To protect power systems against high voltage surges resulting from lightning or switching a complete range of surge arresters are available to be used with Euromold connectors in 11kV/12kV, 24kV and 33kV/36kV voltage classes.
Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV
➡ Read: Thorne & Derrick Announce Distribution Agreement & Contract With Nexans
Indoor & Outdoor Cable Termination | Cold Shrink | Single Core | 11kV 33kV 42kV
Nexans AFN are single core cold shrink cable terminations for use indoor/outdoor and specified to terminate medium/high voltage cables in the following voltage classes:
Slip-on terminations are cold applied terminations require no “hot-working” for safe use in potentially explosive atmospheres and hazardous area locations – the cable terminations are designed for use with polymeric insulated cables (XLPE & EPR). To enable the fault repair, extension, splicing and jointing of existing LV MV HV power cables up to 33kV we also stock a complete range of cold shrink joints.
Slip On Outdoor Cable Terminations 11kV 33kV 42kV Euromold AFN
Outdoor slip-on cold shrink cable termination kit list comprising:
The following tables enable the selection of cable terminations using Cold Shrinkable technology manufactured by Nexans:
| Euromold Termination Slip-on Cold Shrink |
Voltage Um (kV) |
Conductor Sizes (sqmm) | |
| min | max | ||
| Nexans AFN 10 | 12kV | 25sqmm | 1200sqmm |
| Nexans AFN 20 | 24kV | 35sqmm | 1200sqmm |
| Nexans AFN 30 | 36kV | 50sqmm | 1000sqmm |
| Nexans AFN 36 | 42kV | 70sqmm | 1000sqmm |
PADS Approved by Network Rail | 25kV Switchgear Terminations
Nexans AFN36-6 42kV single core MV cable terminations are Network Rail PADS Approved – the cold-applied Slip-on cable termination is approved for use with Siemens ASG25 – 25kV air insulated switchgear for AC traction power supply systems.
Select the Euromold part number corresponding to both the system voltage and the cable insulation diameter in mm.
The complete kit comprises of 3 termination housings, installation instructions, special lubricant, wiper, adhesive tape and field control mastic.
| Voltage Um (kV) |
Conductor Sizes (sqmm) |
Diameter Over Core Insulation (mm) |
Number Of Sheds | L (mm) (max) |
Dia. D (mm) | Creepage Distance (mm) |
Nexans Ordering Part Number |
||
| min | max | min | max | ||||||
| 12kV | 25 | 95 | 12.7 | 21.0 | 3 | 210 | 90 | 369 | 3 x AFN 10-1 |
| 120 | 240 | 19.0 | 28.5 | 3 | 210 | 96 | 365 | 3 x AFN 10-2 | |
| 300 | 500 | 27.0 | 37.0 | 3 | 210 | 105 | 360 | 3 x AFN 10-3 | |
| 630 | 800 | 34.0 | 46.0 | 4 | 240 | 118 | 462 | 3 x AFN 20-4 | |
| 1000 | 39.0 | 50.0 | 7 | 405 | 127 | 755 | 3 x AFN 36-5 | ||
| 1200 | 46.0 | 58.0 | 7 | 405 | 127 | 755 | 3 x AFN 36-6 | ||
| 24kV | 35 | 70 | 18.0 | 23.5 | 4 | 240 | 100 | 480 | 3 x AFN 20-1 |
| 95 | 240 | 22.5 | 33.0 | 4 | 240 | 112 | 499 | 3 x AFN 20-2 | |
| 300 | 500 | 31.0 | 41.0 | 4 | 240 | 118 | 462 | 3 x AFN 20-3 | |
| 400 | 630 | 34.0 | 46.0 | 4 | 240 | 118 | 462 | 3 x AFN 20-4 | |
| 630 | 800 | 39.0 | 50.0 | 7 | 405 | 127 | 755 | 3 x AFN 36-5 | |
| 1000 | 1200 | 46.0 | 58.0 | 7 | 405 | 127 | 755 | 3 x AFN 36-6 | |
| 36kV | 50 | 70 | 23.5 | 29.0 | 6 | 300 | 115 | 695 | 3 x AFN 30-1 |
| 95 | 240 | 27.0 | 38.0 | 6 | 300 | 115 | 694 | 3 x AFN 30-2 | |
| 240 | 400 | 32.0 | 43.0 | 6 | 300 | 127 | 718 | 3 x AFN 30-3 | |
| 400 | 630 | 39.0 | 50.0 | 7 | 405 | 127 | 755 | 3 x AFN 36-5 | |
| 630 | 1000 | 46.0 | 58.0 | 7 | 405 | 127 | 755 | 3 x AFN 36-6 | |
| 42kV | 70 | 120 | 28.0 | 32.0 | 7 | 405 | 127 | 755 | 3 x AFN 36-3 |
| 150 | 300 | 31.5 | 41.0 | 7 | 405 | 127 | 755 | 3 x AFN 36-4 | |
| 400 | 630 | 39.0 | 50.0 | 7 | 405 | 127 | 755 | 3 x AFN 36-5 | |
| 630 | 1000 | 46.0 | 58.0 | 7 | 405 | 127 | 755 | 3 x AFN 36-6 | |
| For use in heavy polluted areas (cable terminations with an increased creepage length) | |||||||||
| 42kV | 70 | 120 | 28.0 | 32.0 | 11 | 535 | 127 | 1079 | 3 x AFNP 36-3 |
| 150 | 300 | 31.5 | 41.0 | 11 | 535 | 127 | 1079 | 3 x AFNP 36-4 | |
| 400 | 630 | 39.0 | 50.0 | 11 | 535 | 127 | 1079 | 3 x AFNP 36-5 | |
| 630 | 1000 | 46.0 | 58.0 | 11 | 535 | 127 | 1079 | 3 x AFNP 36-6 | |
Thorne & Derrick distribute the complete range of medium/high voltage electrical equipment manufactured by Nexans – this includes Euromold bushings for use with oil fluid or gas insulated switchgear or transformers and associated screened separable connectors according to both IEC (Euromold) and IEEE (Elastimold) for the termination, connect+disconnect of MV-HV cables onto power distribution systems. To protect power systems against high voltage surges resulting from lightning or switching a complete range of surge arresters are available to be used with Euromold connectors in 11kV/12kV, 24kV and 33kV/36kV voltage classes.
Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV
➡ Read: Thorne & Derrick Announce Distribution Agreement & Contract With Nexans
Indoor Cable Termination | Cold Shrink | Single Core | 11kV 33kV 42kV
Nexans AIN are single core cold shrink slip-on cable terminations for use indoor and specified to terminate and connect medium/high voltage cables in the following voltage classes:
Slip-on terminations are cold applied terminations require no “hot-working” for safe use in potentially explosive atmospheres and hazardous area locations – the cable terminations are designed for use with polymeric insulated cables (XLPE & EPR). To enable the fault repair, extension, splicing and jointing of existing LV MV HV power cables up to 33kV we also stock a complete range of cold shrink joints.
Slip On Indoor Cable Terminations 11kV 33kV 42kV Euromold AIN – Design
Indoor slip-on cable termination kit list comprising:
The following tables enable the selection of cable terminations using Cold Shrinkable technology manufactured by Nexans:
| Euromold Termination Slip On Cold Shrink |
Voltage Um (kV) |
Conductor Sizes (sqmm) | |
| min | max | ||
| Nexans AIN 10 | 12kV | 25sqmm | 1200sqmm |
| Nexans AIN 20 | 24kV | 35sqmm | 1200sqmm |
| Nexans AIN 30 | 36kV | 50sqmm | 1000sqmm |
| Nexans AIN 36 | 42kV | 150sqmm | 1000sqmm |
Select the Euromold part number corresponding to both the system voltage and the cable insulation diameter in mm – the complete kit comprises of 3 termination housings, installation instructions, special lubricant, wiper, adhesive tape and field control mastic.
| Voltage Um (kV) |
Conductor Sizes (sqmm) |
Diameter Over Core Insulation (mm) |
Number Of Sheds | L (mm) |
Dia. D (mm) | Nexans AIN Ordering Part Number |
||
| min | max | min | max | |||||
| 12kV | 25sqmm | 95sqmm | 12.7 | 21.0 | 2 | 150 | 37 | 3 x AIN 10-1 |
| 120sqmm | 240sqmm | 19.0 | 28.5 | 2 | 150 | 43 | 3 x AIN 10-2 | |
| 300sqmm | 500sqmm | 27.0 | 37.0 | 2 | 150 | 60 | 3 x AIN 10-3 | |
| 630sqmm | 800sqmm | 34.0 | 46.0 | 3 | 225 | 68 | 3 x AIN 36-4 | |
| 1000sqmm | 39.0 | 50.0 | 7 | 405 | 98 | 3 x AIN 36-5 | ||
| 1200sqmm | 46.0 | 58.0 | 7 | 405 | 98 | 3 x AIN 36-6 | ||
| 24kV | 35sqmm | 70sqmm | 18.0 | 23.5 | 3 | 225 | 47 | 3 x AIN 20-1 |
| 95sqmm | 240sqmm | 22.5 | 33.0 | 3 | 225 | 56 | 3 x AIN 20-2 | |
| 300sqmm | 500sqmm | 31.0 | 41.0 | 3 | 225 | 68 | 3 x AIN 20-3 | |
| 400sqmm | 630sqmm | 34.0 | 46.0 | 3 | 225 | 68 | 3 x AIN 20-4 | |
| 630sqmm | 800sqmm | 39.0 | 50.0 | 7 | 405 | 98 | 3 x AIN 36-5 | |
| 1000sqmm | 1200sqmm | 46.0 | 58.0 | 7 | 405 | 98 | 3 x AIN 36-6 | |
| 36kV | 50sqmm | 70sqmm | 23.5 | 29.0 | 6 | 300 | 74 | 3 x AIN 30-1 |
| 95sqmm | 240sqmm | 27.0 | 38.0 | 6 | 300 | 74 | 3 x AIN 30-2 | |
| 240sqmm | 400sqmm | 32.0 | 43.0 | 6 | 300 | 81 | 3 x AIN 30-3 | |
| 400sqmm | 630sqmm | 39.0 | 50.0 | 7 | 405 | 98 | 3 x AIN 36-5 | |
| 630sqmm | 1000sqmm | 46.0 | 58.0 | 7 | 405 | 98 | 3 x AIN 36-6 | |
| 42kV | 150sqmm | 300sqmm | 31.5 | 41.0 | 7 | 405 | 98 | 3 x AIN 36-4 |
| 400sqmm | 630sqmm | 39.0 | 50.0 | 7 | 405 | 98 | 3 x AIN 36-5 | |
| 630sqmm | 1000sqmm | 46.0 | 58.0 | 7 | 405 | 98 | 3 x AIN 36-6 | |
Thorne & Derrick distribute the complete range of medium/high voltage electrical equipment manufactured by Nexans – this includes Euromold bushings for use with oil fluid or gas insulated switchgear or transformers and associated screened separable connectors according to both IEC (Euromold) and IEEE (Elastimold) for the termination, connect+disconnect of MV-HV cables onto power distribution systems. To protect power systems against high voltage surges resulting from lightning or switching a complete range of surge arresters are available to be used with Euromold connectors in 11kV/12kV, 24kV and 33kV/36kV voltage classes.
Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV
➡ Read: Thorne & Derrick Announce Distribution Agreement & Contract With Nexans
Cable Termination | Cold Shrink | Single Core | 11kV 24kV
Nexans OTK are single core cold shrink cable terminations for use indoor and specified to terminate and connect medium/high voltage cables in the following voltage classes:
Cold Shrinkable terminations require no “hot-working” for safe use in potentially explosive atmospheres and hazardous area locations – the cable terminations are designed for use with polymeric insulated cables (XLPE & EPR). To enable the fault repair, extension, splicing and jointing of existing LV MV HV power cables up to 33kV we also stock a complete range of cold shrink joints.
Cold Shrink Outdoor Cable Terminations 11kV 24kV Euromold OTK – Design
Outdoor cold shrink cable termination comprising:
The following tables enable the selection of cable terminations using Cold Shrinkable technology manufactured by Nexans:
| Nexans Cold Shrink Cable Terminations | Voltage Um (kV) |
Creepage Distance A-B (mm) |
Strike Distance L (mm) |
Number Of Sheds |
Fig. No. |
Diameter Over Core Insulation (mm) |
Conductor Sizes (sqmm) | ||
| min | max | min | max | ||||||
| OTK 212 | 11kV 12kV | 420 | 300mm | 3 | 1 | 14 | 33 | 50sqmm | 400sqmm |
| OTK 312 | 11kV 12kV | 890 | 650mm | 6 | 2 | 30 | 50 | 400sqmm | 1000sqmm |
| OTK 224 | 20kV 24kV | 600 | 400mm | 5 | 3 | 14 | 33 | 25sqmm | 240sqmm |
| OTK 324 | 20kV 24kV | 890 | 650mm | 6 | 4 | 30 | 50 | 300sqmm | 800sqmm |
Select the Nexans part number corresponding to both the system voltage and the cable insulation diameter in mm.
Kit Contents For Euromold OTK Terminations
| Euromold OTK Cold Shrink Cable Terminations | Voltage Um (kV) |
Diameter Over Core Insulation (mm) |
Conductor Sizes (sqmm) | ||
| min | max | min | max | ||
| 3 x OTK 212 | 11kV 12kV | 14 | 33 | 50sqmm | 400sqmm |
| 3 x OITK 312 | 11kV 12kV | 30 | 50 | 400sqmm | 1000sqmm |
| 3 x OTK 224 | 11kV 24kV | 14 | 33 | 25sqmm | 240sqmm |
| 3 x OTK 324 | 11kV 24kV | 30 | 50 | 300sqmm | 800sqmm |
All commercialised European standard cable lugs can be used. Cable lugs should be within the dimensions specified (not applicable for Nexans OTK 312 and OTK 324).
Thorne & Derrick distribute the complete range of medium/high voltage electrical equipment manufactured by Nexans – this includes Euromold bushings for use with oil fluid or gas insulated switchgear or transformers and associated screened separable connectors according to both IEC (Euromold) and IEEE (Elastimold) for the termination, connect+disconnect of MV-HV cables onto power distribution systems. To protect power systems against high voltage surges resulting from lightning or switching a complete range of surge arresters are available to be used with Euromold connectors in 11kV/12kV, 24kV and 33kV/36kV voltage classes.
Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV
➡ Read: Thorne & Derrick Announce Distribution Agreement & Contract With Nexans
Heat Shrink | Cold Shrink | Slip-on | Cable Terminations
Stocked by Thorne & Derrick UK & Export Sales | Nexans ITK224
Nexans ITK are single core cold shrink cable terminations for use indoor and specified to terminate and connect medium/high voltage cables in the following voltage classes:
Cold Shrinkable terminations require no “hot-working” for safe use in potentially explosive atmospheres and hazardous area locations – the cable terminations are designed for use with polymeric insulated cables (XLPE & EPR). To enable the fault repair, extension, splicing and jointing of existing LV MV HV power cables up to 33kV we also stock a complete range of cold shrink joints.
Cold Shrink Indoor Cable Terminations 11kV 24kV Nexans ITK – Design
Indoor cold shrink cable termination kit list comprising:
The following tables enable the selection of cable terminations using Cold Shrinkable technology manufactured by Nexans:
| Cable Termination Cold Shrink |
Voltage Um (kV) |
Strike Distance L (mm) |
Diameter Over Core Insulation (mm) |
Conductor Sizes (sqmm) | ||
| min | max | min | max | |||
| Nexans ITK 212 | 11kV / 12kV | 260mm | 14 | 33 | 50sqmm | 400sqmm |
| Nexans ITK 312 | 11kV / 12kV | 300mm | 30 | 50 | 400sqmm | 1000sqmm |
| Nexans ITK 224 | 20kV / 24kV | 260mm | 14 | 33 | 25sqmm | 240sqmm |
| Nexans ITK 324 | 20kV / 24kV | 300mm | 30 | 50 | 300sqmm | 800sqmm |
Select the Nexans part number corresponding to both the system voltage and the cable insulation diameter in mm.
Kit Contents For Nexans ITK Terminations
| Nexans ITK Cold Shrink Cable Termination | Voltage Um (kV) |
Diameter Over Core Insulation (mm) |
Conductor Sizes (sqmm) | ||
| min | max | min | max | ||
| 3 x Nexans ITK 212 | 11kV 12kV | 14 | 33 | 50sqmm | 400sqmm |
| 3 x Nexans ITK 312 | 11kV 12kV | 30 | 50 | 400sqmm | 1000sqmm |
| 3 x Nexans ITK 224 | 11kV 24kV | 14 | 33 | 25sqmm | 240sqmm |
| 3 x Nexans ITK 324 | 11kV 24kV | 30 | 50 | 300sqmm | 800sqmm |
All commercialised European standard cable lugs can be used. Cable lugs should be within the dimensions specified (not applicable for Nexans ITK 312 and ITK 324).
Euromold ITK cold shrink terminations covers voltages from 12kV to 24kV with a maximum conductor size of 1000sqmm. MV indoor termination suited for 11kV polymeric single core cables and will provide the necessary seal against moisture penetration and perfect electrical field control.
Nexans Euromold High Voltage Heat Shrink & Cold Shrink Cable Terminations up to 33kV.
Thorne & Derrick distribute the complete range of medium/high voltage electrical equipment manufactured by Nexans – this includes Euromold bushings for use with oil fluid or gas insulated switchgear or transformers and associated screened separable connectors according to both IEC (Euromold) and IEEE (Elastimold) for the termination, connect+disconnect of MV-HV cables onto power distribution systems. To protect power systems against high voltage surges resulting from lightning or switching a complete range of surge arresters are available to be used with Euromold connectors in 11kV/12kV, 24kV and 33kV/36kV voltage classes.
Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV
➡ Read: Thorne & Derrick Announce Distribution Agreement & Contract With Nexans
Published 25 Mar 2026
klauke ekm60unv – universal cutting, crimping & punching tool The Klauke EKM 60 UNV is a versatile battery powered hydraulic universal tool engineered that can be used as a battery powered cable crimping tool and battery operated cable cutting tools that comes...
Published 18 Mar 2026
INDUSTRIAL LABEL PRINTING SOLUTIONS When clear, durable and professional identification is required across control panels, cable systems, production facilities and industrial installations, print quality, reliability and ease of use are critical. Cembre industrial label printers are designed to support...
