Electric Vehicle Charging Supply Feeder Pillars | EV Feeder Pillars

Published 23 Jul 2021

EV Charging Feeder Pillars

EV Feeder Pillars

EV Charging

Lucy Zodion manufacture a wide range of products suitable to provide Low Voltage Electrical Power Distribution for EV charge points – from distribution network operator (DNO) accredited cut-outs and isolators for on-street chargers, to feeder pillars for electrical vehicle charging.

Meet the increasing demand for accessible EV charging points with power distribution solutions that connect DNO supply with charging outlets. Lucy Zodion’s adaptive and reliable supply solutions consider the charge speeds and times each EV charge point is capable of, from fast to super, to ensure you receive the most suitable and compatible option.

As one of the UK’s leading suppliers of pre-wired power distribution enclosures, Lucy Zodion have developed a standard range of pillars that will support EV charge point requirements that fall into the four categories of main current rating: 100 Amp, 200 Amp, 400 Amp and 630 Amp, providing a link between the DNO and EV charge points. The configuration of all EV feeder pillars in this range can be upgraded once installed to meet future demand requirements.

3-Phase AC Supply | 100 Amp Feeder Pillars

100 Amp supply pillar is the smallest feeder pillar within the range and is available in four different configurations. These pillars cover 7kW supplies through to 50kW, with a differing number of connections on each solution.

100 Amp Supply Feeder Pillar

3-Phase AC Supply | 200 Amp Feeder Pillars

* Use of load management on chargers required

200 Amp Supply Feeder Pillar

200 Amp supply pillar within our range is available in four different configurations.

These pillars cover 7kW supplies through to 50kW, with a differing number of connections on each solution.

3-Phase AC Supply | 400 Amp Feeder Pillars

400 Amp supply pillar within our range is available in four different configurations.

These pillars cover 22kW supplies through to 120kW, with a differing number of connections on each solution.

3-Phase AC Supply | 600 Amp Feeder Pillars

Lucy Zodion | Fortress Feeder Pillars | Pre-Wired Feeder Pillars | Street Lighting Cut-Outs | DNO Cut-Outs | Electrical Power Distribution Enclosures

Further Reading

➡ More Lucy Zodion Blogs:

• Cut Outs & Isolators – Lucy Zodion Explain The Differences
• Feeder Pillars From Lucy Zodion – LV Electrical Power Distribution
• Optional Extras For Use With Lucy Zodion Fortress Feeder Pillars
• Waveform Cable Termination – 3 Core 300sqmm Cable Onto A 2 Ganged Metered Way In Lucy Cabinet

Galvanised & Stainless Steel | GRP | Pre-Wired | Underground Retractable Feeder Pilars

Read our Blog with Lucy Zodion: Cut-Outs & Isolators – What’s the Difference?

THORNE & DERRICK SPECIALIST ELECTRICAL DISTRIBUTOR

LV ♦ MV ♦ HV

T&D distribute the most extensive range of LV, MV & HV Cable Jointing, Terminating, Pulling & Installation Equipment – we service UK and international clients working on underground cables, overhead lines, substations and electrical construction at LV, 11kV, 33kV and EHV transmission and distribution voltages.

• Key Products: MV-HV Cable Joints & Terminations, Cable Cleats, Duct Seals, Cable Transits, Underground Cable Protection, Cable Jointing Tools, Feeder Pillars, Cable Ducting, Earthing & Lightning Protection, Electrical Safety, Cable Glands, Arc Flash Clothing & Fusegear.

• Distributors for: 3M, ABB, Alroc, Band-It, Catu, Cembre, Centriforce, CMP, Elastimold, Ellis Patents, Emtelle, Furse, Lucy Zodion, Nexans Euromold, Pfisterer, Polypipe, Prysmian, Roxtec.

LV – Low Voltage Cable Joints, Glands, Cleats, Lugs & Accessories (1000 Volts)

MV HV – Medium & High Voltage Cable Joints, Terminations & Connectors (11kV 33kV EHV)

Cable Laying – Underground Cable Covers, Ducting, Seals & Cable Pulling Equipment

T&D, CATU Electrical Safety & Arc Flash Protection Specialists for SAP’s, Linesmen, Jointers & Electrical Engineers – Largest UK Stockist