11kV Cable Termination Heat Shrink Kit 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV cable termination kits using heat shrink tubing and technology are suitable for terminating medium/high voltage (MV-HV) 3 core polymeric cables (XLPE EPR) – this includes cables with copper wire or tape screen and armoured (wire armoured/braided) or unarmoured cable for indoor termination of 11kV cables, outdoor version also available.
SPS 3TIS-12X-A cable termination kit suits 11kV cables with 16sqmm and 25sqmm 3 core conductors (copper or aluminium).
11kV Cable Termination
HV High Voltage – Indoor
- Cable Termination Type – Heat Shrink
- Operating Voltage – 11kV
- Termination Location – Indoor (Cable Box, Substation, Switchgear, Transformer, Motor)
- Number of Cores – 3 Core
- Conductors – 16sqmm, 25sqmm
- Cable Type – XLPE EPR (Polymeric)
- Heat Shrink Standard Tail Length – 650mm
- Termination Kit Order Code – SPS 3TIS-12X-A
- Suit MV HV Power Cables – BS6622, BS7835, BS7870, BS6883, BS7917 & IEC60502
11kV 3 Core Cable
Call T&D to discuss your complete requirements for 11kV 3 core 16-25sqmm cable installations:
Electrical Safety | Substation Earthing | Cable Jointing Tools | Cable Duct | Duct Seals |
Circuit Protection | Cable Cleats | Cable Pulling & Laying | Cable Protection | Cutting & Crimping Tools |
➡ High Voltage Cable Termination 11kV Kit List
➡ 11kV Cable Terminations | Single Core Indoor XLPE | Single Core Outdoor XLPE | 33kV Terminations
11kV Terminations indoor 3 Core XLPE epr
The following enables the termination kit selection for 11kV 3 core indoor cables:
11kV Cable Termination Indoor | 3 Core Cable Termination Range | 11kV Cable Termination Outdoor |
3TIS-12X-A | 16-25sqmm XLPE EPR | 3TES-12X-A |
3TIS-12X-B | 35-95sqmm XLPE EPR | 3TES-12X-B |
3TIS-12X-C | 120-240sqmm XLPE EPR | 3TES-12X-C |
3TIS-12X-D | 300-500sqmm XLPE EPR | 3TES-12X-D |
11kV Jointing Instruction
11kV High Voltage cable accessories
T&D supply MV-HV Joints, Terminations & Connectors to enable the installation of MV-HV 6.6kV 11kV 33kV cables into cable end boxes, gas/air insulated switchgear and oil transformers – this includes cold shrink, heat shrink and separable connectors from Nexans Euromold, Elastimold, 3M, Pfisterer and Prysmian.