CATU CG-3 Class 3 Electrical Insulating Rubber Gloves (IEC 60903)

CATU CG-3 Class 3 Electrical Insulating Rubber Gloves (IEC 60903)

CATU CG-3 Class 3 Electrical Insulating Rubber Gloves (IEC 60903)

Electrical Insulating Rubber Gloves

CATU CG-3 are Class 3 insulating gloves to provide electrical protection for live voltages up to 26,500V and are fully compliant with IEC 60903 and EN 60903 standards.

CG-3 gloves do not provide mechanical protection and require silicon leather overgloves (CATU CG-981). Latex with reinforced mechanical protection against tearing.

The electrical insulating rubber gloves are made from bicolor natural latex. (exterior: orange, interior: natural). Traceability through flashcode on colour-coded label. The colour is according to the class.

Class 3 gloves ensure electrical safety and insulating levels for working near live voltages to 26,500V ac and 39,750V dc – see complete range of insulating gloves.

catu CG-3

Class 3 Insulating Rubber Gloves

  • Product Insulating Gloves
  • Part Number CG-3
  • Class 3
  • Live Voltage ≥ 26,500V
  • Tested Voltage 39,750V
  • Category RC – Resistant to Acid, Oil O-Zone & Low Temperatures
  • Total Length 360mm
  • Colour Bi-colour: Red outside, Natural inside
  • Glove Sizes Available 8-12
  • Standards EN 60903 & IEC 60903.
  • Related Products | Insulating Matting | Dielectric & Insulating Boots | Arc Flash Clothing | Insulated Tools
CATU Insulating Glove Part Number Size Length Class Operating Voltage AC Operating Voltage DC Category
CG-03-08-NR 8 360 3 26500V 39750V RC
CG-03-09-NR 9 360 3 26500V 39750V RC
CG-03-10-NR 10 360 3 26500V 39750V RC
CG-03-11-NR 11 360 3 26500V 39750V RC
CG-03-12-NR 12 360 3 26500V 39750V RC

CATU CG-3 Class 3 Electrical Insulating Rubber Gloves (IEC 60903)

To help select the correct size class 00 glove please view the image below or download our Glove Sizing Chart.

If you need any further advice about insulating gloves or electrical safety equipment for working on LV MV HV substation switchgear, transformers, cables or equipment please contact us.

Class 3 Insulating Gloves

Class 3 Insulating Gloves

Class 3 Insulating Gloves

CG-3 Class 3 Gloves - Selection Guide

CG-3 Class 3 Gloves – Selection Guide

INSULATING GLOVES – CLASS & CATEGORY

The following gloves manufactured by CATU Electrical do not provide mechanical protection and must be used with silicon leather glove covers or over-gloves – manufactured to IEC 60903 and EN 60903 standards.

Code Glove Class Voltage Insulating Thickness Category Length Colour
CATU CG-05 Class 00 Gloves ≤500V 0.5mm AZC 360mm Beige
CATU CG-10 Class 0 Gloves ≤1000V 1mm RC  360mm Beige
CATU CG-15 Class 1 Gloves ≤7500V 1.5mm RC 360mm Bi-Colour
CATU CG-20 Class 2 Gloves ≤17000V 2.3mm RC 360mm Bi-Colour
CATU CG-30 Class 3 Gloves ≤26500V 2.9mm RC 360mm Bi-Colour
CATU CG-40 Class 4 Gloves ≤36000V 3.6mm AZC 410mm Bi-Colour
  • A = Acid
  • H = Oil
  • Z = Ozone
  • R = Acid, Oil, Ozone
  • C = Very Low Temperature
Insulating Gloves

LV, MV & HV Insulating Gloves for cable jointers, linesmen and engineers live working on underground cables and overhead lines, including 11kV-33kV medium/high voltage switchgear and substations. Contact us for Electrical Safety Equipment.