CATU CG-4 Class 4 Electrical Insulating Rubber Gloves (IEC 60903)
CG-4 gloves do not provide mechanical protection and require silicon leather overgloves (CATU CG-981).
Class 4 gloves ensure electrical safety and insulating levels for working near live voltages to 36,000V ac and 54,000V dc – see complete range of insulating gloves.
Class 4 Insulating Rubber Gloves
- Product Insulating Gloves
- Part Number CG-4
- Class 4
- Live Voltage ≥ 36,000V
- Tested Voltage 54,000V
- Category RC – Resistant to Acid, Oil O-Zone & Low Temperatures
- Total Length 410mm
- Colour Bi-colour: Red outside, Natural inside
- Glove Sizes Available 9-12
- Standards EN 60903 & IEC 60903.
To help select the correct size class 3 glove please view the image below or download our Glove Sizing Chart.
If you need any further advice about insulating gloves or electrical safety equipment for working on LV MV HV substation switchgear, transformers, cables or equipment please contact us.
INSULATING GLOVES – CLASS & CATEGORY
The following gloves manufactured by CATU Electrical do not provide mechanical protection and must be used with silicon leather glove covers or over-gloves – manufactured to IEC 60903 and EN 60903 standards.
|CATU CG-05||Class 00 Gloves||≤500V||0.5mm||AZC||360mm||Beige|
|CATU CG-10||Class 0 Gloves||≤1000V||1mm||RC||360mm||Beige|
|CATU CG-15||Class 1 Gloves||≤7500V||1.5mm||RC||360mm||Bi-Colour|
|CATU CG-20||Class 2 Gloves||≤17000V||2.3mm||RC||360mm||Bi-Colour|
|CATU CG-30||Class 3 Gloves||≤26500V||2.9mm||RC||360mm||Bi-Colour|
|CATU CG-40||Class 4 Gloves||≤36000V||3.6mm||AZC||410mm||Bi-Colour|
- A = Acid
- H = Oil
- Z = Ozone
- R = Acid, Oil, Ozone
- C = Very Low Temperature