Cembre A20-M10
Cembre A20-M10
Cembre A20-M10
95sqmm Cable Lugs
Cembre A20-M10 low voltage cable lugs terminate 95sqmm copper conductors.
Install Using Crimping Tool: Cembre HT131-C , Cembre HT51
Typical Cable Lug Applications: Low Voltage (Up to 3.3kV)
Cembre A20-M10 is a 95sqmm copper tube crimp lug with M8 stud – short circuit tested up to 11kV for medium/high voltage termination of stranded copper cables with 95sqmm conductor cross section in dry indoor locations and compatible with both Cold Shrink and heat shrink terminations.
A20-M10
- Manufacturer: Cembre
- Primary Application: Termination Crimp LV Cables
- Secondary Application: Termination Crimp MV Cables 11kV
- Conductor Size Stranded Copper: 95qmm
- Ø Stud Size: 10mm
- Internal Diameter Øi: 13.5mm
- Width Of Lug Palm B: 25.0mm
- Lug Hole Centres M: 11.5mm
- Lug Hole Centres N: 9.5mm
- Cable Crimp Lug Length L: 56.5mm
- Dia d: 10.5mm
- Low Voltage Cable Lugs
- Cembre A20-M 95sqmm Cable Lugs
Install using Cembre Tools – complete range of ratchet, hydraulic and batter operated crimping tools are available.
- See also – Cembre Crimping Tools
- Full range – Cable Crimps, Lugs & Connectors
HV High Voltage Cable Lugs – Cembre single/double hole, angled and stalk connectors for 11kV-33kV cables
LV Low Voltage Cable Lugs 600/1000V (11kV Dry Indoor Applications) – InstructionsDownload
