Cembre A20-M6

Cembre A20-M6

Cembre A20-M6

95sqmm Cable Lugs

Cembre A20-M6 low voltage cable lugs terminate 95sqmm copper conductors.

Install Using Crimping Tool: Cembre HT131-C , Cembre HT51

Typical Cable Lug Applications: Low Voltage (Up to 3.3kV)

Cembre A20-M6 is a 95sqmm copper tube crimp lug with M8 stud – short circuit tested up to 11kV for medium/high voltage termination of stranded copper cables with 95sqmm conductor cross section in dry indoor locations and compatible with both Cold Shrink and heat shrink terminations.

A20-M6

• Manufacturer: Cembre
• Primary Application: Termination Crimp LV Cables
• Secondary Application: Termination Crimp MV Cables 11kV
• Conductor Size Stranded Copper: 95qmm
• Ø Stud Size: 6mm
• Internal Diameter Øi: 13.5mm
• Width Of Lug Palm B: 25.0mm
• Lug Hole Centres M: 8.0mm
• Lug Hole Centres N: 7.0mm
• Cable Crimp Lug Length L: 50.5mm
• Dia d: 6.4mm
• Low Voltage Cable Lugs
• Cembre A20-M 95sqmm Cable Lugs

Install using Cembre Tools – complete range of ratchet, hydraulic and batter operated crimping tools are available.

• See also – Cembre Crimping Tools 
• Full range – Cable Crimps, Lugs & Connectors

HV High Voltage Cable Lugs – Cembre single/double hole, angled and stalk connectors for 11kV-33kV cables

Data Sheets

• LV Low Voltage Cable Lugs 600/1000V (11kV Dry Indoor Applications) – Instructions
  Download
• LV Low Voltage Cable Lugs 600/1000V (11kV Dry Indoor Applications) – Installation
  Download