Cembre A7-M12

Cembre A7-M12

Cembre A7-M12

35sqmm Cable Lugs

Cembre A7-M12 low voltage cable lugs terminate 35sqmm copper conductors.

Install Using Crimping Tool: Cembre HT131-C , Cembre HT51 , 

Typical Cable Lug Applications: Low Voltage (Up to 3.3kV)

Cembre A7-M12 is a 35sqmm copper tube crimp lug with M8 stud – short circuit tested up to 11kV for medium/high voltage termination of stranded copper cables with 35sqmm conductor cross section in dry indoor locations and compatible with both Cold Shrink and heat shrink terminations.

A7-M12

• Manufacturer: Cembre
• Primary Application: Termination Crimp LV Cables
• Secondary Application: Termination Crimp MV Cables 11kV
• Conductor Size Stranded Copper: 35sqmm
• Ø Stud Size: 12mm
• Internal Diameter Øi: 8.9mm
• Width Of Lug Palm B: 21.0mm
• Lug Hole Centres M: 14.0mm
• Lug Hole Centres N: 12.0mm
• Cable Crimp Lug Length L: 47.5mm
• Dia d: 13.2mm
• Low Voltage Cable Lugs
• Cembre A7-M 35sqmm Cable Lugs

Install using Cembre Tools – complete range of ratchet, hydraulic and batter operated crimping tools are available.

• See also – Cembre Crimping Tools 
• Full range – Cable Crimps, Lugs & Connectors

HV High Voltage Cable Lugs – Cembre single/double hole, angled and stalk connectors for 11kV-33kV cables

Data Sheets

• LV Low Voltage Cable Lugs 600/1000V (11kV Dry Indoor Applications) – Instructions
  Download
• LV Low Voltage Cable Lugs 600/1000V (11kV Dry Indoor Applications) – Installation
  Download