Cold Shrink End Caps | Filoform CE3

Filoform Cold Shrink End Caps

Filoform Cold Shrink End Caps | Seal LV MV HV Cables

COLD SHRINK END CAPS

filoform ce3

Cold Shrink End Caps, manufactured by Filoform, environmentally seal and mechanically protect exposed cable ends without using tools, mastics or tapes.

The cable caps are close-ended, tubular rubber sleeves that are factory expanded using Cold Shrink technology, and loaded onto a removable core.

When the cable cap is positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal which protects your LV MV HV cable ends from environmental damage.

The cable caps are easily installed and cleanly removable and require no training to apply.

Whether in transit from the cable manufacturer, stored in the cable yard, or in process in a cable trench, the cable ends are protected from exposure to moisture, contamination and corrosion.

Cold Shrink is applied cold, unlike heat shrink, it does not require a naked flame or heat shrink torch to install in potentially explosive atmospheres and hazardous area locations.

Filoform Cable Joints - Connect Seal Protect

filoform ce3 specifications

Filoform Cold Shrink End Caps protect cables, pipes and other cylindrical objects from exposure to moisture, contamination, corrosion, ozone, ultra-violet radiation, physical contact and other environmental hazards.

  • Product Number: FiloShrink CE-3
  • Cold Shrink after recovery inner diameter (mm) min: 23.0
  • Cold Shrink after supplied inner diameter (mm) max: 54.0

The following table enables the correct selection and specification of Cold Shrink cable caps dependant upon the cable type:

Size of Conductor 1 Core Armoured 2 Core Armoured 3 Core Armoured 4 Core Armoured 5 Core Armoured
25 mm² * *
35 mm² * *
50 mm² *
70 mm² *
95 mm² *
120 mm² *
150 mm² *
185 mm² *
240 mm² *
300 mm² *
400 mm² *

*POA – check suitablility of cable caps for your application with Thorne & Derrick.

Data Sheets