Earth Bars With Single Disconnecting Links

Earth Bars With Single Disconnecting Links

Copper Earth Bars

Standard Bars with Single Disconnection Links

T&D distribute the complete range of Earth Bars that are manufactured from 50mm x 6mm hard drawn copper bar with optional single disconnection links and fittings.

The AN Wallis Earth Bars are available in a variety of sizes and specifications. Special earth bars can manufactured to meet customer requirements are also available. Recommended fixing by countersunk wood screw 11/2” x No. 12 and No. 12 wall plug.

Earth bars with single disconnection links offer a temporary break in the connection to earth allowing the testing of an earth rod whilst disconnecting from the earthing system.

Also: Standard Copper Earth Bars | Earth Bars With Twin Links

➡ Earth bars with Single Disconnection Links provide common point earthing system for electrical installations, options include termination points from 2 to 30 – the copper bar is 50mm x 6mm (hard drawn type to BS EN 13601) with lightweight plastic base. Using Wallis Earth Bar Software (WEBS) we can provide custom design earth bars on short lead times at competitive prices fully Tested to BS EN 62561-1 Class H – the bars are suitable for both indoor and outdoor earthing installations, direct burial underground and embedded into building materials including concrete or thermal insulation.

Standard & Tinned Copper Earth Bars | Brass bolts are used as standard for plain copper bars. Stainless steel bolts are used as standard for tinned copper bars.

Earth Bars With Single Disconnecting Links

SELECTION TABLE

The table enables the selection of copper earth bars with single disconnecting links when specifying copper conductors for earthing and lightning protection systems.

AN Wallis Part Number	Number of Ways/Terminations	Earth Bar Dimensions (length x width x height)	Unit weight
EBC106	6	485mm x 90mm x 60mm	2.50kg
EBC108	8	585mm x 90mm x 60mm	3.00kg
EBC110	10	735mm x 90mm x 60mm	3.90kg
EBC112	12	835mm x 90mm x 60mm	4.70kg
EBC114	14	935mm x 90mm x 60mm	5.60kg
EBC116	16	1035mm x 90mm x 60mm	6.50kg
EBC118	18	1185mm x 90mm x 60mm	7.40kg
EBC120	20	1335mm x 90mm x 60mm	8.30kg
EBC122	22	1385mm x 90mm x 60mm	9.20kg
EBC124	24	1485mm x 90mm x 60mm	10.10kg
EBC126	26	1635mm x 90mm x 60mm	11.00kg
EBC128	28	1735mm x 90mm x 60mm	11.90kg
EBC130	30	1885mm x 90mm x 60mm	12.80kg

SUBSTATIONS LV MV HV

T&D supply DNO’s, IDNO’s, ICP’s and utility power contractors involved in the construction and maintenance of MV-HV substations – this includes duct seals for underground cable duct, cable cleats to support cables, underground cable protection and a full range of MV-HV cable joints, terminations and connectors in heat shrink, cold shrink and push-on technologies for XLPE, PILC, oil and gas insulated cables.