Ellis Patents 1FP-16SS 32-38mm Fireproof Cable Cleat

Ellis Patents 1FP-16SS 32-38mm Fireproof Cable Cleat

ELLIS CABLE CLEATS

Single Cable Cleats

Cable Cleat Maximum Short Circuit Test Level 60kA – Cleat Spacing 600mm

Ellis 1FP-16SS Ellis Patents Phoenix cable cleats are designed for the installation of Fire Protection (FP) rated cables – the fireproof cleats are manufactured from stainless steel, easy to fit and are corrosion resistant  – suitable for LV (Low Voltage), MV (Medium Voltage) and HV (High Voltage) power cable circuits.

Ellis 1FP-16SS cable cleats are suitable for securing single-way power cables from between 32-38mm overall cable diameter forming part of the Ellis Patents range of single cable cleats.

Phoenix Cable Cleats form part of the Ellis Patents range of fireproof rated cable cleats.

Cleats tested to BS 8491:2008 and BS 5839-1: 2002, section 26.2d.

Ellis Cable Cleat 1FP-16SS

Technical Specification

  • Cable Cleat Diameter Min 32mm
  • Cable Cleat Diameter Max 38mm
Ellis Patents 1FP-16SS 32-38mm Fireproof Cable Cleat

Ellis Patents 1FP-16SS 32-38mm Fireproof Cable Cleat

Ellis patents 1FP-16SS Cleat Dimensions

  • H 46mm
  • W 66mm
  • D 40mm
  • E 13.7mm
  • Weight 176g

SINGLE CABLE CLEAT SELECTION TABLE

Specification details for Ellis Patents Phoenix 1FP-16SS cable cleat for single cable applications:

Phoenix Cable Cleat Part Number Min Dia (mm) Max Dia (mm) H (mm) W (mm) D (mm) E (mm) Cleat Fixing Holes Weight (g)
1FP-16SS 32 38 46 66 40 13.7 1 x M10 176

 

Ellis Patents Fireproof Cable Cleat - Dimensions

Ellis Patents Fireproof Cable Cleat – Dimensions

Phoenix CABLE CLEATS – INSTALLATION INSTRUCTIONS

Installation instructions for single way cables using Phoenix cable cleats manufactured by Ellis Patents:

Position the cable clamp and fixing (not supplied) onto the support structure Install the cable Locate the other half of the cable clamp. Secure a nut and washer (not supplied) to the support structure and tighten Important - Do not over tighten the clamp. The clamp should secure the cable but does not need to be so tight that the cable bulges at either side of the clamp or becomes angled excessively.
1. Position the cable clamp and fixing (not supplied) onto the support structure 2. Install the cable 3. Locate the other half of the cable clamp. Secure a nut and washer (not supplied) to the support structure and tighten 4. Important – Do not over tighten the clamp. The clamp should secure the cable but does not need to be so tight that the cable bulges at either side of the clamp or becomes angled excessively.
Fire Resistant Cables & Cleats

Fire resistant cables and accessories including cable joints, glands and cleats ensure continued operation of armoured power cables in emergency and essential building service systems in the event of fire.

FP Fire Protection Cables Prysmian - Cable Cleats

Cable cleats suitable for clamping and supporting Prysmian FP200 Gold, FP400, FP600, FP600S and Firetuf PowerPlus fire resistant cables.