600/1000V Heat Shrink Transition Joints To Suit 4 Core PILC To XLPE 50-95sqmm – SPS SPAPX 50-95-4

Heat Shrink Joints to Suit Low Voltage Cables Type PILC/SWA/PVC 0.6/3.3kV

600/1000V Heat Shrink Transition Joints To Suit 4 Core PILC To XLPE 50-95sqmm

Heat shrink cable joints are suitable for jointing 4 Core PILC to XLPE cables with a cable conductor range of 50-95sqmm for voltages up to 1000V.

The cable joint kit offers the same benefits and comprises of similar components to those in the polymeric range, with the addition of heat shrink breakout boots, core tubes and earthing for the lead sheath on paper cables.

SPS SPAPX 50-95-4 is a straight (PILC – PILC) joint: transition (XLPE – PILC), pot-end and abandonment kits also available.

  • Cable Joint Type – Heat Shrink
  • Cable Voltage – 1000V (Up to 3.3kV)
  • Number of Cores – 4 Core
  • Conductors – 50sqmm, 70sqmm, 95sqmm
  • Cable Type – PILC/SWA/PVC
  • Heat Shrink Joint Kit Order Code – SPS SPAPX 50-95-4

Heat Shrink Joints to Suit Low Voltage Cables

Features & Benefits

  • Meets the cable jointing requirements of BS6910 Part 1, Test Report available
  • Unlimited shelf life
  • Slim profile – can be installed into cable duct, vertically, trenched underground and onto cable tray
  • Allows for immediate backfill and re-energisation
  • Zero Halogen | Fire Resistant
  • Cold Shrink Cable Joints LV
Heat Shrink Transition Joints 4 Core PILC To PILC
SPS Part Number Cable Range  Voltage
SPAPX 16-35-4 16-35sqmm 600/1000V
SPAPX 50-95-4 50-95sqmm 600/1000V
SPAPX 120-150-4 120-150sqmm 600/1000V
SPAPX 185-300-4 185-300sqmm 600/1000V*Suitable up to 3.3kV

LV Heat Shrink Joints XLPE EPR – full range of joints, terminations and connectors for medium/high voltage cables are available.

MV HV Cables
Heat Shrink Cable Terminations 6.6kV 11kV 33kV

6.6kV 11kV 33kV Cable Joints & Terminations – cable connections, splices and joints for LV, MV & HV cables