Polypipe Polyduct Power Class 3 Cable Duct (ENATS 12-24)
Polypipe Polyduct Power Class 3 cable duct provides a durable, lightweight and flexible cable protection and fully complies with ENATS 12-24 Class 3 specification.
Polyduct cable duct is constructed from medium density polyethylene (MDPE) and is available in three inner diameter sizes of 32mm, 38mm and 50mm, in coiled duct lengths of 25m, 50m or 100m.
Polypipe power Class 3 cable duct can be used within open trench or trenchless applications.
T&D offer a full range of LV, MV & HV power cable duct, contact us for further information.
ENATS 12-24 Class 3 Cable Ducts
ENATS is the Energy Networks Association which represents the cables and pipes Transmission and Distribution network operators for gas and electricity in the UK.
ENATS 12-24 is the technical specification for plastic ducts for buried electric cables and defines the essential performance requirements and limiting dimensions, colour and identification details for coiled and non coiled, plain or corrugated wall, circular cross section, extruded plastic cable ducts.
ENATS 12-24 Class 3 Cable Ducts are able to provide 450N compression strength at 23ºC.
Polypipe Polyduct Power Class 3 Cable Duct
Features & Benefits
- Complies with ENATS 12-24 Class 3, 450N compression strength at 23°C
- Complies with BS EN 61386-24:2010, Type 450N, normal duty impact resistance
- Available in 25m, 50m or 100m coils plain ended
- Flexibility of coil eliminates the needs for specialised cable duct bends
- High impact resistance for Class 3 power cable protection
Class 3 Cable Duct – Product Range selection table
|Polypipe Polyduct Cable Duct Product Code||Inner Duct Diameter (mm)||Outer Duct Diameter (mm)||Length (m)||Pack Quantity
cABLE DUCT Black Couplings
|Polypipe Part Code
||Inner Diameter (mm)||Outer Diameter (mm)||Pack Quantity|