Fire Resistant Cable Clips – Prysmian FP Firefix Single Cable Clips

FP Cable Clips

Prysmian FireFix

Prysmian FP Firefix Single Cable Clips are single piece fire resistant cable clips which are LUL approved for the rapid installation of fire alarm and emergency lighting cables.

Prysmian FP Firefix are part of the Prysmian fire resistant range of cable clips for cable support available in red and white for cables with diameters between 7.7mm to 9.2mm. Each fire resistant clip weighs 2.5kg and is made from stainless steel.

Fire Resistant Cable Clips

Prysmian FP Firefix Single Cable Clip Features & Benefits

LUL APR Product ID 1960
Nail fixed fire resistant clip
The Firefix system is fast easy and meets the cable support requirements of British standards: BS5839-1: 2002, BS5266-1:2011 and BS5839-8:2006
Designed to be used with the Spit Pulsa gas nailing technology for rapid installation
Made from corrosion resistant stainless steel which is coated an intumescent LSOH coating in either white or red to match the cable
Should be installed in accordance with BS7671 / IEE wiring regulations, or other appropriate code
Can be fixed to steel, block work, composite steel decking, brick or concrete
The fixing of the single cable clip and installation of the cable takes just 10 seconds

➡ View the complete range of Fire Resistant Cable Cleats.

Also from Prysmian ➡ Trefoil Cable Cleats

FP Firefix from Prysmian

FP Firefix cable clips are available in single and double clip design made from corrosion resistant stainless steel coated with LSOH coating in either red or white to match the cable.

➡ Prysmian also have a range of FP Firefix Double Cable Clips for rapid installation of fire alarms and emergency lighting cables in accordance with BS7671 / IEE wiring regulations or other appropriate code.

Prysmian FP Firefix Single Cable Clip Selection				Prysmian FP Firefix Single Cable Clip Details
Prysmian BICON Order Code		Cable Diameter		Installed Dimensions (mm)			Nail Size	Kit Quantity	Weight (g)	Kit Weight (kg)
Standard	Colour	A (mm)		Height	Width	Length
Standard	Colour	Min	Max	Height	Width	Length
FPNF01R	Red	7.7	8.2	13.6	13.8	15.3	17mm	500	4.4	2.5
FPNF01W	White	7.7	8.2	13.6	13.8	15.3	17mm	500	4.4	2.5
FPNF01R15	Red	7.7	8.2	13.6	13.8	15.3	15mm	500	4.2	2.5
FPNF01W15	White	7.7	8.2	13.6	13.8	15.3	15mm	500	4.2	2.5
FPNF03R	Red	8.2	9.2	13.6	13.8	15.3	15mm	500	4.2	2.5
FPNF03W	White	8.2	9.2	13.6	13.8	15.3	15mm	500	4.2	2.5

Kit contains clips, ITW nails and gas cartridge. Nailing tool sold separately. Part Number PULSA800E

Installing FP Firefix Single Cable Clip

Position the Firefix fire resistant cable clip directly on to the nail guide (no adaptors required)
Ensure the substrate is clear before pushing the Spit Pulsa tool against the substrate, and nailing the clip into position
Place the cable into the fire resistant clip
Close clip

Prysmian FP Firefix Single Cable Clip – Fire Resistant Installation Steps

➡ For further information and selection details about Prysmian FP Firefix Single Cable Clip refer to the product sections below – see Prysmian Cable Cleats to view cable support clamps for LV, MV & HV cables including short-circuit protection for 11kV and 33kV cables.

View the complete Prysmian range of Single Way Cable Cleats.

Prysmian Cable Cleats Joints Glands Tools

See more: Prysmian Cable Cleats, Joints, Glands & Jointing Tools

Prysmian – mv hv 11kv 33KV CABLE ACCESSORIES

Prysmian manufacture the BICON range of electrical cable accessories including cable joints, terminations, glands and cleats to enable the installation of LV-HV power cables; contact T&D to discuss your 11kV-33kV requirements for jointing, terminating, cleating and glanding of medium voltage and high voltage cables.

Prysmian BICON Cable Joints Cable Glands Cable Cleats Jointing Tools