Prysmian FPNF01W FP Firefix Single Cable Clip
Fire Resistant Cable Clips
 
Prysmian Firefix are single piece fire resistant cable clips which are LUL (London Underground) approved for the rapid installation of fire resistant alarm and emergency lighting cables – the Prysmian FPNF01W FP clip suits cables up to 8.2mm diameter.
The fire resistant cable clips meet the cable support requirements of the British Standard BS5839-1:2002.
FPNF01W FP Firefix single cable clip is a fixing for FP200 gold fire resistant cables for use in fire detection and alarm systems for buildings, voice alarm systems, emergency lighting systems and other essential service circuits – allowing significant installation cost savings.
Prysmian FPNF01W FP Firefix
Single Cable Clip
Technical Specification
- Clip Colour – White
- FPNF01W Cable Diameter – 7.7-8.2mm
- Nail Size – 17mm
- Kit Quantity – 500
- Kit Contents – Clips, ITW nails and gas cartridge. Nailing tool sold separately (Prysmian PULSA800E)
- Fire Resistant Cable Clips
- Single Cable Clip
Prymian FPNF01W fire resistant clips are also available in colour red – order code Prysmian FPNF01R
Prysmian FPNF01W FP Clip Dimensions
- Height – 13.6mm
- Width – 13.8mm
- Length – 15.3mm
- Clip Weight – 4.4g each
- Kit Weight – 2.5kg
âž¡ See Prysmian Cable Cleats to view cable support clamps for LV, MV & HV cables including short-circuit protection for 11kV and 33kV medium/high voltage power cables.
Fire Resistant Cable Cleat Selection Table
Specification details for Prysmian FPNF01W single cable clip:
| Prysmian FP Firefix Single Cable Clip Selection | Prysmian FP Firefix Single Cable Clip Details | |||||||||
| Prysmian BICON Order Code | Cable Diameter | Installed Dimensions (mm) | Nail Size | Kit Quantity | Weight (g) | Kit Weight (kg) | ||||
| Standard | Colour | A (mm) | Height | Width | Length | |||||
| Min | Max | |||||||||
| FPNF01W | White | 7.7 | 8.2 | 13.6 | 13.8 | 15.3 | 17mm | 500 | 4.4 | 2.5 |
INSTALLING FP FIREFIX SINGLE CABLE CLIP
- Position the Firefix fire resistant cable clip directly on to the nail guide (no adaptors required)
- Ensure the substrate is clear before pushing the Spit Pulsa tool against the substrate, and nailing the clip into position
- Place the cable into the fire resistant clip
- Close clip
Prysmian FP Firefix Single Cable Clip – Fire Resistant Installation Steps
Single Way Cable Cleats | 2 Bolt Cleats | Hook Cleats | Claw Cleats | High Voltage | Afumex Cable Cleats
Prysmian – mv hv 11kv 33KV CABLE ACCESSORIES
Prysmian manufacture the BICON range of electrical cable accessories including cable joints, terminations, cable glands and cleats to enable the installation of LV-HV power cables; contact T&D to discuss your 11kV-33kV requirements for jointing, terminating, cleating and glanding of medium voltage and high voltage cables.
Prysmian FPNF01W FP Firefix Single Cable ClipDownload
