Voltage Detector HV 50kV to 765kV | Pbwel Htag

Voltage Detector HV

PBwel HTAG 50kV – 75kV

The Htag voltage detector from Pbwel can detect nominal voltage on medium and high voltage overhead lines or substations – it is designed to check the absence of nominal voltage in a circuit of high voltage and very high voltage systems from 50kV to 765kV (voltage range according to IEC recommendation).

Direct access to the battery and sealed electronics compartment. When the battery is replaced, this design prevents the following:

Accidental interchange of housing or circuitry;
Damage to electronic circuits;
Humidity ingress into the device when the battery is replaced outdoors.

Contact T&D for advice and the full technical details.

Optimal light indication visible in sunlight and in fog

HV Voltage Detector

BENEFITS

Optimum sound indication- clearly audible in all working conditions.
Direct access to the battery and sealed electrics compartment for easy configuration that prevents the accidental swapping of housing and circuitry.
Optimal light indication visible in sunlight and in fog.
Wide visibility angle
Functional reliability the low battery voltage test is indicated by a dedicated orange LED.
100 dB sound signal (from 1 metre)
Full protection of electronic circuits
Rechargeable by standard micro USB 5V plug.

Ordering Information

HV Voltage Detector Product Reference	Voltage Range	Frequency
HTAG090225FC	90 – 225kV	50 / 60 Hz
HTAG225400F5C	225 – 400kV	50 / 60 Hz

Pbwel together with T&D introduce an innovative new electrical safety product to the UK market – ALADIN is an individual voltage alarm with headlamp that attaches to a helmet suitable for use with MV overhead lines in the voltage range of 10-69kV.

Voltage Detectors & Equipment