Arc Flash Helmet & Visor Class 1
Arc Flash Helmets
Arc Flash Helmet & Visor Class 1 By ProGARM
ProGARM Arc Flash Helmet & Visor are certified to protect against the Thermal Hazards of an Electric Arc and manufactured using Modified High Impact Polyamide.
The arc flash helmets are designed to protect the head against injuries caused by falling objects, electric shock by preventing shock current flow through the head and is also approved with the faceshield for short circuit arc welding and protection against molten metal splashes.
Should you require guidance on selection and use of an Arc Flash Calculator please call Thorne & Derrick, the UK’s leading specialist distributor of electrical safety equipment for LV (Low Voltage), MV (Medium Voltage) and HV (High Voltage).
Arc flash helmets have been developed as the results of market research for live working with electrical connections, the faceshield also includes unique protection for the chin not found on other arc flash helmets.
Arc flash helmet sizes – 223x310x200mm
Arc Flash Protection
- IEC 61482-1-1:2009 Open Arc Test Method Cal Rating – N/A
- IEC 61482-1-2:2007 Box Test Method Class 1 or Class 2 – Class 1
Arc Flash Helmet & Visor Class 1
Features & Benefits
- Class 1 Box Test
- Stroke absorption after conditioning in temperatures of (-30º) and (0º)
- Resistance to penetration after conditioning in temperatures of (-30º) and (+50º)
- Live working symbol (Two Triangles)
- Working temperature range: -30°C to +50°C
- Wheel ratchet adjustment
- Adjustable head circumference of helmet & visor from 53-63cm
- Two level height adjustment feature
- Short peak
- 4 point webbing harness
- Accessory slot for ear defenders
- Electrical insulation (Class 0) 1000V AC, 1500V DC
- Resistance to Molten Metal Splash (MM)
- Resistance to Lateral Deformations (LD)
See full range of Arc Flash Clothing, PPE & Protection Garments
ProGARM 2660 arc flash helmet & visor conform to the following European Standards:
- EN 166:2001
- GS-ET 29:2010
Helmet | Care Information
ProGARM 2660 arc flash helmet & visor must be carefully cleaned to ensure arc flash protection levels are maintained.
- Do not bleach, boil or use soap based products – clean polo shirts using detergents only
- Dirty clothing may lead to reduction in arc flash protection
- Company will not accept liability for garments where care labels have been ignored, neglected, defaced or removed
- Always store arc flash clothing in clean dry conditions
- Do not store in places subject to direct strong sunlight
Related Arc Flash Clothing Protection & Products
IEC 61482 PROTECTIVE CLOTHING AGAINST THE THERMAL HAZARDS OF AN ELECTRIC ARC
Arc flash clothing and garments in a layered combination deliver workwear protection against hazards according to IEC 61482 – PPE protects the worker against electric arc flash dangers. According to IEC 61482-1-1:2009 (encompassing NFPA 70E 2015) the 4 arc risk categories are numbered according to the severity threat and determine the clothing protection level required to protect against a minimum level of incident energy measured in calories / cm² – this is the ‘Open Arc’ test method and measures clothing protection level according to the Arc Thermal Performance Value (ATPV).
The ‘Box Arc’ tests clothing materials and fabric according to a pass/fail test by exposure to electric arc produced by 4kA (Class 1) and 7kA (Class 2) short circuits – this is IEC 61482-1-2:2007.
ARC 1 4 Cal ♦ ARC 2 8 Cal ♦ ARC 3 25 Cal ♦ ARC 4 40 Cal
IEC Standard 61482 – Class 1
Garment Category – Helmet & Visor
Order Code – ProGARM 2660
- Anti Static BS EN 1149-5:2008 Electrostatic Properties Of Protective Clothing
- Flame Resistant EN ISO 11612:2015 Protective Clothing Against Heat & Flame