➡ Contact Thorne & Derrick International for the most competitive prices and largest UK stocks of Cold Shrink Cable Joints manufactured by 3M Electrical – specified extensively in the hazardous area industries including onshore and offshore oil, gas and petrochem for safe cable joints in potentially explosive atmospheres where “hot-working” is not permitted.
♦ See also the 3M Electrical range of Offshore Cable Joints suitable for power, control and instrumentation cables in the marine and offshore industries – includes NEK606 (RFOU BFOU EPR) and BS6883/BS7917 (UKOOA) offshore cables and specifications of cable joints compliant with the recommendations of the ATEX Directive for hazardous area cable installations distributing LV MV HV electricity supply.
Cold Shrink Joints – LV HMV HV Power Cable Joints 600V/1000V 11kV 33kV
Cable Terminations | Heat Shrink | Cold Shrink | Push-On | MV HV Medium & High Voltage
Nexans 24CSJ type MV cable joints are straight cold shrink joints for jointing single core polymeric insulated medium voltage cables to be laid in air on cable containment or directly buried into a cable trench.
Nexans 24CSJ cold shrink cable joints are fully screened and fully submersible for MV-HV cable jointing in industrial or hazardous area locations.
Nexans cable joints are available in both heat shrink and cold shrink technologies for jointing and repairing medium/high voltage cables up to 33kV – single core and 3 core cable joints kits are available for MV-HV cables with paper or polymeric insulation, copper wire or copper tape screen and armoured/unarmoured construction.
The Cold Shrink Joints accommodate both copper or aluminium conductors and accept shearbolt cable connectors or crimp connectors.
The following table enables the selection of Nexans 24CSJ cold shrink cable joints for 11kV and 24kV voltage cables:
| Nexans Cold Shrink Cable Joint Type | L (mm) | Diameter Over Outer Sheath (mm) | Diameter Over Core Insulation (mm) | Conductor Sizes For 11kV 12kV (sqmm) (For Information Only) |
Conductor Sizes For 24kV (sqmm) (For Information Only) | |||
| Max | Min | Max | Min | Max | Min | Max | ||
| Nexans Joint 24CSJ-1 | 750mm | 46mm | 18mm | 33mm | 95sqmm | 300sqmm | 35sqmm | 185sqmm |
| Nexans Joint 24CSJ-2 | 750mm | 46mm | 23mm | 38mm | 185sqmm | 300sqmm | 95sqmm | 300sqmm |
| Nexans Joint 24CSJ-3 | 850mm | 57mm | 30mm | 54mm | 400sqmm | 630sqmm | 240sqmm | 630sqmm |
➡ More Cable Jointing Videos | Heat Shrink Terminations | Heat Shrink Joints Transition | Heat Shrink Joints Straight | Separable Connectors | Cold Shrink Terminations
THORNE & DERRICK Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV
The Euromold range of Separable Connectors are suitable for the termination of power cables onto all MV-HV bushing interfaces:
 |
 |
 |
 |
 |
 |
View the complete range of Nexans Terminations | Joints | Connectors
Published 12 Mar 2026
Compound Box Filling Compound end boxes rarely get attention — until one fails. Across ageing networks, replacement of compound-filled end boxes is becoming more frequent, particularly where original insulation systems have deteriorated and air insulation is not practical because...
Published 06 Mar 2026
Nexans 240–300mm² Multi-Joint – Medium Voltage Cable Joint Installation Medium voltage cable jointing requires reliability, consistency and safe installation practices. The Nexans 240–300mm² Multi-Joint is designed to simplify medium voltage jointing while maintaining high electrical performance for demanding power...
