Nexans Euromold Separable Connectors | MV HV Elbows Tees Plugs – Interface B
Interface B – Nexans Euromold Connectors, Plugs, Elbows, Bushings & Surge Arresters
Nexans Euromold Interface B separable connectors for terminating MV-HV cables (including XLPE EPR 11kV 17.5kV, 24kV, 33kV) – a complete range of elbow and tee connectors for termination of medium/high voltage cables into switchgear, transformers, motors and substations up to 36kV.
Full supporting range of Euromold elbow 33kV connectors, tee connectors and bushings suitable for Interface B bushings (400 Amp) according to CENELEC EN 50180 and 50181.
Euromold Interface B connectors are suitable for termination of polymeric (XLPE EPR) insulated cables with copper wire or tape screen, wire armoured (SWA/AWA), wire braided or unarmoured cables into MV-HV Electrical Equipment with Interface B bushings.
- 6/10 (12) kV
- 6.35/11 (12) kV
- 8.7/15 (17.5) kV
- 12/20 (24) kV
- 12.7/22 (24) kV
- 18/30 (36) kV
- 19/33 (36) kV
- Up to 36kV 400 Amps
Euromold connectors can be configured to terminate MV-HV cables in single (with or without tap-off) or dual cable arrangement for 11kV/12kV, 20/24kV up to 33kV/36kV.
➡ Blog: Euromold 400 Series Connectors | Interface B Bushings | Nexans Euromold
Interface B Connectors
MV HV Euromold Products
- Euromold 400LR Elbow Connector
- Euromold 400TE Tee Connector
- Euromold 400T1 Bushing
- Euromold 400AR-1 Bushing
- Euromold 400AR-2 Bushing
- Euromold 400AR-8 Bushing
- Euromold 400SFR-P Bushing
33kV Connectors Interface B
Short Circuit Ratings
B1
- Contact Type – Pin & Socket
- Connector Current Rating – 250A
- RMS Symm
1 Sec – 12.5kA
2 Sec – 9.0kA
3 Sec – 7.5kA - Peak Asymm – 31kA
- Cable Connector Voltage Um – 36kV
B2
- Contact Type – Pin & Socket
- Connector Current Rating – 400A
- RMS Symm
1 Sec – 16.0kA
2 Sec – 11.3kA
3 Sec – 9.2A - Peak Asymm – 40kA
- Cable Connector Voltage Um – 36kV
Euromold 400LR Elbow Connectors Up to 36kV 400A
Euromold separable connector type |
Voltage Um (kV) |
Current Ir (A) | Conductor sizes (sqmm) | |
min | max | |||
400LR/G | 11kV | 400 Amps | 50 | 240 |
K400LR/G | 24kV | 400 Amps | 25 | 240 |
M400LR/G | 36kV | 400 Amps | 35 | 185 |
Euromold 400LR Ordering Instructions
Select the Nexans Euromold connector part number from the below table which provides the best centring to the cable core insulation diameter and substitute X according to the conductor size and type. For 24kV connectors add a “K” or add “M” for 33kV/36kV connectors.
Euromold Connector Order Example – the MV-HV cable to be terminated is XLPE insulation 11kV/12kV with 150sqmm stranded copper conductor with a core insulation diameter over the medium/high voltage power cable of 23.5mm. Order Code: Nexans Euromold 400LR/G-19-150(K)M-11-2.
Euromold 400LR Connector Part Number |
Dia. over core insulation (mm) | |
min | max | |
400LR/G-11-X | 12.0 | 17.5 |
400LR/G-15-X | 16.0 | 22.0 |
400LR/G-19-X | 20.0 | 26.5 |
400LR/G-22-X | 23.5 | 31.0 |
400LR/G-25-X | 26.5 | 32.5 |
400LR/G-27-X | 28.5 | 37.5 |
Connectors Suitable For Copper & Aluminium Cables
Conductor sizes (sqmm) |
Aluminium Cable | Aluminium and copper conductor |
Copper Cable | |
DIN Hexagonal Crimp | Deep Indent Crimp | DIN Hexagonal Crimp | ||
25sqmm | – | – | 25.95-14-5 | 25(K)M-11-2 |
35sqmm | 35(K)M-12-2 | 35KM-12-1 | 35(K)M-11-2 | |
50sqmm | 50(K)M-12-2 | 50(K)M-12-1 | 50(K)M-11-2 | |
70sqmm | 70(K)M-12-2 | 70(K)M-12-1 | 70(K)M-11-2 | |
95sqmm | 95(K)M-12-2 | 95(K)M-12-1 | 95(K)M-11-2 | |
120sqmm | 120(K)M-12-2 | 120(K)M-12-1 | 95.240-14-5 | 120(K)M-11-2 |
150sqmm | 150(K)M-12-2 | 150(K)M-12-1 | 150(K)M-11-2 | |
185sqmm | 185(K)M-12-2 | 185(K)M-12-1 | 185(K)M-11-2 | |
240sqmm | 240(K)M-12-2 | 240(K)M-12-1 | 240(K)M-11-2 |
Interface B Bushing Connectors
Full supporting range of Euromold medium voltage accessories for use with Interface B connectors are available.
MV bushing clamping kits are available for French standard (NF C 52-053) and German standard (DIN 42 538) electrical equipment including gas insulated switchgear and transformers – fixing clamping kits for equipment bushings include fixing flange, stud clamp and sealing gasket.
Nexans Dead-End Receptacles (12kV 400DR, 24kV K400DR, 36kV M400DR)
Receptable used to fit over a bushing with a type B Interface to provide “dead-end” function. Used with Euromold 400BA restraint bail. Receptacle available with integral earth lead.
400DR Euromold
Nexans Euromold 400SOP Stand-Off Plugs (12kV 400SOP, K400SOP 24kV, M400SOP 36kV)
Stand-off plugs used to support and “dead-end” connectors with a type B Interface when removed from medium/high voltage electrical equipment.
400SOP Euromold
Nexans Euromold 400GP Earthing Plugs (12kV 400SOP, 24kV K400SOP, 36kV M400SOP)
Earthing plug designed to support and earth Euromold connectors with type B Interface bushings when removed from medium/high voltage equipment.
400GP Euromold
Nexans Euromold 400BIPA Insulating Plugs (12kV 400BIPA, 24kV K400BIPA, 36kV M400BIPA)
Acts as a tightening nut for the Euromold 400TE tee connector termination – the 400BIPA plug contains a voltage detection point. The conductive rubber protection cap is included.
400BIPA Euromold
Nexans Euromold 400CP-SC Connecting Plugs (12kV 400CP-SC, 24kV K400CP-SC, 36kV M400CP-SC)
Plugs used to connect the Euromold 400TE and one or more 430TB, 400TB or 440TB connectors thus creating a multiple cable connection to the MV equipment bushings.
400CP-SC Euromold
Nexans Euromold 400RTPA Reducing Tap Plugs (12kV 400RTPA, 24kV K400RTPA)
Plugs provide a type A Interface to a Euromold 400TE connector.
400RTPA Euromold
➡ For further information on Euromold Connectors for all other Interface Bushings please see the following information:
HV Connectors manufactured by Nexans Euromold to suit Interface B bushings, 11kV-33kV. Call us to discuss your requirements for cable connectors, terminations and joints for 11kV-33kV high voltage power networks.
Interface B Bushings
➡ View the complete range of Nexans Euromold Connectors suitable for cable termination of 11kV, 33kV and up 66kV MV-HV cable.
11kV 33kV Heat Shrink Terminations | 33kV Cold Shrink Joints
➡ See the below product sections for the complete range of Nexans Euromold Connectors suitable for Interface B bushings on MV-HV equipment.
Euromold MV HV | Cable Terminations, Connectors, Elbows & Joints