3 Core 2.5sqmm BS5467 XLPE SWA Cable

3 CORE BS5467 CABLE

2.5 SQMM

3 core 2.5sqmm BS5467 XLPE SWA cable glands suitable for terminating steel wire armoured (SWA) cable with XLPE insulation, 3 core 2.5sqmm copper conductors – indoor, outdoor and hazardous area types available.

Cable glands, cleats, joints and crimp lugs are available to install all types of Low Voltage SWA Armoured Cables.

➡ Thorne & Derrick stock and distribute glands, cleats, joints and cable crimp lugs to terminate and install all types of Low Voltage SWA Armoured Cables into switchgear, distribution boards and feeder pillars.

Conductor Cross Section Area: 2.5sqmm
Approximate Diameter Under Armour (SWA): 8mm
Cable Outside Diameter: 13mm
Nominal Diameter Of Wire Armours (SWA): 0.9mm
Approximate Cable Weight: 350kg/km
Current Rating Direct In Ground: 42 Amps
Current Rating In Duct: 34 Amps
Current Rating In Air: 35 Amps
Indoor Cable Termination: BW20S Cable Gland
Outdoor Cable Termination: CW20S Cable Gland
2.5sqmm Cable Lugs using Cembre A Range Crimps

Cable Core Identification

Blue – Brown

To terminate BS5467 3 core 2.5sqmm XLPE armoured cable in hazardous areas use Prysmian KA472-52 E1WF cable gland.

Should you require any technical support to connect, terminate or gland any type of LV-HV cable please do not hesitate to contact us.

BW & CW Cable Glands Suit 3 Core 2.5sqmm XLPE SWA BS5467 Cables

➡ The following selection table enables the specification of the correct BW Cable Gland to terminate 2, 3 and 4 core armoured cables (SWA) in indoor environments, 600/1000V.

Number of Cores

1.5sqmm

2.5sqmm

4sqmm

6sqmm

10sqmm

16sqmm

25sqmm

35sqmm

50sqmm

70sqmm

95sqmm