3 Core 50sqmm BS5467 XLPE SWA Cable

3 CORE BS5467 CABLE

50 SQMM

3 core 50sqmm BS5467 XLPE SWA cable glands suitable for terminating steel wire armoured (SWA) cable with XLPE insulation, 3 core 50sqmm copper conductors – indoor, outdoor and hazardous area types available.

Cable glands, cleats, joints and crimp lugs are available to install all types of Low Voltage SWA Armoured Cables.

➡ Thorne & Derrick stock and distribute glands, cleats, joints and cable crimp lugs to terminate and install all types of Low Voltage SWA Armoured Cables into switchgear, distribution boards and feeder pillars.

Conductor Cross Section Area: 50sqmm
Approximate Diameter Under Armour (SWA): 23mm
Cable Outside Diameter: 30mm
Nominal Diameter Of Wire Armours (SWA): 1.6mm
Approximate Cable Weight: 2400kg/km
Current Rating Direct In Ground: 217 Amps
Current Rating In Duct: 177 Amps
Current Rating In Air: 209 Amps
Indoor Cable Termination: BW32 Cable Gland
Outdoor Cable Termination: CW32 Cable Gland
50sqmm Cable Lugs using Cembre A Range Crimps

Cable Core Identification

Blue – Brown

To terminate BS5467 3 core 50sqmm XLPE armoured cable in hazardous areas use Prysmian KA472-56 E1WF cable gland.

Should you require any technical support to connect, terminate or gland any type of LV-HV cable please do not hesitate to contact us.

BW & CW Cable Glands Suit 3 Core 50sqmm XLPE SWA BS5467 Cables

➡ The following selection table enables the specification of the correct BW Cable Gland to terminate 2, 3 and 4 core armoured cables (SWA) in indoor environments, 600/1000V.

Number of Cores

1.5sqmm

2.5sqmm

4sqmm

6sqmm

10sqmm

16sqmm

25sqmm

35sqmm

50sqmm

70sqmm

95sqmm