Alroc PG2 | Cable Sheath Stripping Pliers MV HV Cables 21-35mm

PG2 HTA MV HV Cable Jointing Tool

THORNE & DERRICK | Largest European Stockist for Alroc Cable Jointing & Preparation Tools | UK & Export Sales

Cable Sheath Stripping Pliers

Alroc PG2 HTA

Alroc PG2 tool is a cable stripping tool for the clean and precise removal of the outersheath of cables with a 21-35mm range – the PG range of tools provide a “ring and circle” cut to the cable sheath and remove the risk of site accidents associated with “open-blade” type tools or standard electrician knives.

PG2 HTA cable tools manufactured by Alroc are used by LV-MV-HV jointers to remove the outer sheath to prepare the cable ready for the installation of joints, terminations or connectors – the cable preparation tools are quick, light to hold and easy to use by the Jointer when stripping jacket/sheath from LV (Low), Medium (MV) and (HV) High Voltage Cables.

The PG2 HTA, manufactured by Alroc and supplied by Thorne & Derrick, enables the jointer to make a circular and longitudinal cut to the cable order to remove cable’s outer sheath. All cutting depth ranging from 0,5 mm / 0,019 in to 5 mm / 0,196 in are available on demand. Contact T&D for details.

Alroc - Cable Jointing Tools

Alroc cable tools are used by LV MV HV cable jointers to remove cable sheath and jackets to provide excellent cable preparation prior to the installation of joints, terminations or connectors using cold shrink, heat shrink or push-on type technology.

Alroc PG2

Cable Pilers

Technical Specification

Cutting depth ranging from 0.5 mm / 0.019 in to 5 mm / 0.196 in are available on demand. Contact T&D for more information.

How to build your customised PG2 cable stripping pliers:

ALROC PG2HTA/yyzz

yy = Circular cutting depth e.g : 28 = 2,8 mm / 0,110 in

zz = Longitudinal cutting depth e.g : 28 = 2,8 mm / 0,110 in

ALROC PG2 SPARE TOOL PARTS

MTL2/28 – Spare blade for longitudinal cutting 2,8mm / 0,110 in
MTC2/28 – Spare blade for circular cutting 2,8 mm / 0,110 in (x4

Alroc tools are precision engineered for the critical preparation and removal of all types of cable sheath including XLPE, PE, PVC, LLPE, PUR and rubber types.

Alroc PG2 HTB Tool

Technical Specification

Cable Tool Part Number	PG2 Diameter	Alroc PG2 Tool Capacity		Tool Dimensions			Packaging
Cable Tool Part Number	PG2 Diameter	Circular cutting thickness capacity	Longitudinal cutting thickness capacity	Length	Width	Height	Packaging
Alroc PG2HTA/2828	21 – 35 mm 0,827 – 1,378 in	2,8 mm / 0,110 in	2,8 mm / 0,110 in	240 mm 9,449 in	85 mm 3,346 in	80 mm 3,150 in	None

Associated Manufacturers

COMPLEMENTARY TOOLS for the Jointing & Termination of Cables


Alroc CWB/18-60 – Semiconductor Screen Stripping Tool	Alroc LH3 – HV Cable Insulation Stripping Tool (60-80mm)

Cable preparation Tools

MV HV EHV

MV Medium Voltage Cables 11kV 33kV
HV High Voltage Cables 66kV
EHV Extra High Voltage Transmission & Distribution Cables 132kV 245kV 400kV

MV HV – Medium & High Voltage Cable Joints, Terminations & Connectors (11kV 33kV EHV)

Pfisterer | 3M | Nexans | Prysmian – Joints, Terminations & Connectors MV HV

➡ For further information about Alroc cable tools for removing cable sheath from LV-MV-HV cables please see below.

CABLE TOOLS FOR MEDIUM & HIGH VOLTAGE JOINTING OF CABLES

THORNE & DERRICK are Specialist Distributors of LV HV Cable Jointing, Earthing, Substation & Electrical Eqpt up to 66kV – this includes the most extensive range of Ex Stock Innovation Tooling to facilitate safe and reliable preparation, cutting, crimping, termination and installation of cables from leading brands including Klauke and Cembre.