4 Core 300sqmm BS5467 XLPE SWA Cable

4 CORE BS5467 CABLE

300 SQMM

4 core 300sqmm BS5467 XLPE SWA cable glands are available for terminating steel wire armoured cable indoor, outdoor and in hazardous area locations according to the ATEX Directive and IECEx classification.

Cable glands, cleats, crimp lugs and cable joints are available to install all types of Low Voltage SWA Armoured Cables.

➡ Thorne & Derrick stock and distribute glands, cleats, joints and cable crimp lugs to terminate and install all types of Low Voltage SWA Armoured Cables into switchgear, distribution boards and feeder pillars.

• Cable Insulation: XLPE
• Type Of Armour: SWA Steel Wire Armour
• Number of Conductor Cores: 4 Core
• Conductor Cross Section Area: 300sqmm
• Cable Rating: LV 600/1000V
• Approximate Diameter Under Armour (SWA): 56.9mm
• Cable Outside Diameter: 66.8mm
• Nominal Diameter Of Wire Armours (SWA): 2.5mm
• Approximate Cable Weight: 15750kg/km
• Current Rating Direct In Ground: 592 Amps
• Current Rating In Duct: 496 Amps
• Current Rating In Air: 666 Amps
• Indoor Cable Termination: BW75S Cable Gland
• Outdoor Cable Termination: CW75S Cable Gland 
• 300sqmm Cable Lugs using Cembre A Range Crimps

Cable Core Identification

Brown, Black, Grey & Blue

Should you require any technical support to connect, terminate or gland any type of LV-HV cable please do not hesitate to contact us.

BW & CW Cable Glands Suit 4 Core 300sqmm XLPE SWA BS5467 Cables

➡ The following selection table enables the specification of the correct BW Cable Gland to terminate 2, 3 and 4 core armoured cables (SWA) in indoor environments, 600/1000V.

Ellis Cleats | Cembre Lugs | 3M Scotchcast Joints | Prysmian Glands – Low Voltage Cable Accessories

Data Sheets

• 4 Core 300sqmm BS5467 XLPE SWA Cable
  Download