Cable Stand | MV HV Cable Jointing Stand for Medium & High Voltage Cable Installations (apu2.0)

MV HV Cable Jointing Stand for Medium & High Voltage Cable Installations

Cable Stand for Jointing & Terminating Cables

Vicera Cable Joint Stand APU2.0

Vicera Products are Approved by & Used by Nexans | Ensto | Prysmian Group | TE-Connectivity (Tyco)

Vicera’s cable joint stand APU2.0 was developed together with experienced cable jointers for the installation of MV and HV cable joints and terminations. With APU2.0 cable preparation and support work is easier, more ergonomic, and efficient to deliver. Based on significant experiences and feedback from the field, cable jointers rely on this to achieve higher quality of medium voltage cable installations.

Each cable clamp of the APU2.0 cable joint stand can be adjusted to its own desired position. Cable clamps have stepless adjustment in the lateral and tilt angle directions. Even if the cable comes from the ground vertically, it is possible to attach in APU2.0 cable clamp. The height adjustment is very wide.

Cables can be attached to APU2.0 very close to the ground with an installation height of 20cm and maximum height is 145cm. Legs has as well multiple adjustment options and thus, it can be used in almost all kinds of joint bays. Legs can be adjusted in 180 degrees angle to place it on a cable trench. The clamps are designed to fit any MV and HV cable from 18mm to 90mm in outer diameter.

APU2.0 is in widespread use for applications including joint bays and substation installations – the jointing stand is used by several MV Cable Accessory manufacturers in training sessions and field demonstrations.

Thorne & Derrick distribute the most extensive range of Cable Pulling & Cable Laying Equipment to enable the installation of low, medium and high voltage power cables into underground trench or duct.

💡 Product Review | Bart Baeyens (Nexans Technical Customer Manager) – “the cable stands provide the necessary stable position to prepare any cable without issues, thanks to the weight and clever design. You can easily adjust height and position resulting on a comfortable position in every situation.”

Cable Stands for the Support & Stability of LV MV HV Cable During Jointing & Termination

APU2.0 Cable Joint Stand Benefits

Very wide adjustment options
Installation height 10” 57” / 25 cm 145 cm
Sturdy clamps where the cables will stay in place
Stepless lateral and tilt adjustment in clamps
Suitable for all cables with an outer diameter of 5/8” 3,5” / 18mm 90mm
Suitable for almost any terrain
Better ergonomics
More efficient and easier to achieve best quality
Risk minimisation during the preparation, jointing and termination of Medium & High Voltage Cables

Product:	Vicera Cable Stand APU2.0
Product Code:	64 136 11
Length:	180 mm
Width:	730 mm
Height:	720 mm
Weight:	17 kg

Pictured | Cable stand manufactured by Vicera providing support and stability to medium voltage cables undergoing the termination, connection and installation of Nexans Euromold type P909TB/G screened separable connectors.

Cable Stand | Cable Joint Stand | Cable Tool

VICERA’S goal is to bring new tool innovations to the market so that working would be more ergonomic, efficient and of higher quality.

Cable Stands MV HV Medium High Voltage Cables

Cable Stands | Safer & Stable Jointing, Termination & Connection of Medium & High Voltage Cables (MV HV)

Cable Jointing Preparation Tools | Thorne & Derrick supply from stock Jointing Tools to enable the Cutting, Crimping & Preparation of all LV MV HV Cables – this includes the removal of sheath/jacket, screen, insulation and precision engineered procedures of the cable preparation process including chamfering, bevelling, grooving and shaving.

Cable Tools

THORNE & DERRICK are Specialist Distributors of LV HV Cable Jointing, Earthing, Substation & Electrical Eqpt up to 66kV – this includes the most extensive range of Ex Stock Innovation Tooling to facilitate safe and reliable preparation, termination and installation of cables.