Battery Operated Torque Gun – Lithium Type Industrial Bolting Tool

Published 17 Sep 2018

• uploaded by Chris Dodds - Thorne & Derrick Sales & Marketing Manager

Thorne & Derrick are Specialist Distributors of Battery Operated Cable Crimping & Cutting Tools – this is supported by a range of battery type torque guns specified to reduce worker injury and improve Health & Safety with a reduction in hand-arm vibration related injuries associated with the use of conventional hand-held power tools.

Battery Operated Torque Gun

Lithium Series battery operated torque guns are the ultimate solution for portability and convenience on industrial bolting jobs. With the world’s first 36-volt industrial battery system, these tools are ready for heavy industrial use. The lightweight design of the torque tools and dual speed capability make this system the go-to choice for industrial maintenance, contracting and production environments worldwide.

The Lithium Series was designed from the ground up using aerospace-grade materials to provide a compact design with industrial durability and power. The metal frame cut from a solid piece of aluminium alloy protects the tool from damage on industrial jobs. The 36-volt battery provides sufficient power to get through the toughest bolted joints.

Industrial-Grade Power

With a simple switch, the Lithium Series goes from high speed rundown mode to accurate final torque mode eliminating the need for multiple systems on a job. The precision machined gearbox provides constant power without the vibration and noise found in impact guns. Adjust the power through the digital readout on the back of the gun to fine-tune the torque output for any job.

Dual Speed Bolting

The Lithium Series makes torque and angle bolting simpler than ever before. The desired torque can be entered in Imperial or Metric followed by the desired angle. When the trigger is pulled the tool will automatically apply the torque, pause, and then apply the programmed angle. When complete the light on the back of the tool will turn green and a short beep will be heard.

Data Recording

Battery Operated Torque Gun – Dimensions

Lithium Type Industrial Bolting Tool

Specification

Should you require any further information or advise in order to select or purchase the most suitable Battery Operated Torque Guns & Tools please do not hesitate to contact us.

LV MV HV Cable Accessories & Substation Electrical Equipment

Thorne & Derrick are Specialist Distributors of leading manufacturers of Cable Accessories, Jointing & Installation Equipment.

LV MV HV cable accessories used to joint, terminate, connect, cleat and gland power cables to air and gas insulated substations, transformers, switchgear and overhead line networks.

Hover over our Interactive Electricity Grid to learn more about our product ranges.

LV 600/1000V ◊ MV 11kV 33kV ◊ HV 66kV 132kV 

T&D are Main Stockists of Cutting & Crimping Tools manufactured by Cembre

Substation & Overhead Line Electrical Safety Equipment

Manufactured by CATU Electrical to enable the safe construction, maintenance and repair of underground cables and overhead lines network up to EHV (400kV).

Insulating Matting | Voltage Detectors | Insulating Gloves | Insulating Sticks

T&D - CABLES ♦ JOINTS ♦ TERMINATIONS ♦ CONNECTORS ♦ GLANDS ♦ CLEATS ♦ CRIMPS & LUGS ♦ DUCT ♦ SEALS ♦ ARC FLASH PPE
EARTHING ♦ FEEDER PILLARS ♦ JOINTERS TOOLS ♦ CABLE CUTTING & CRIMPING TOOLS ♦ COLD SHRINK ♦ HEAT SHRINK ♦ FUSES   

Further Reading

• Battery Operated Torque Gun – Lithium Type Industrial Bolting Tool Size: 1.83 MB