Arc Flash Jacket Category 2 10 Cal Hi Vis Orange

Arc Flash Jacket Category 2 10 Cal Hi Vis Orange

Arc Flash Jacket Category 2 10 Cal Hi Vis Orange

ProGARM Arc Flash Jacket is tested to achieve Category 2 protection with 10cal/cm² according to IEC 61482-1-1:2009 ‘open arc’ test method – designed to be worn in conjunction with 4616 arc flash trousers.

Arc flash jacket sizes ranging from S-4XL.

Suitable for workers on or near the trackside requiring garments certified to GO/RT 3279. This is improved jacket with new lighter and more comfortable fabric

Arc Flash Protection
  • IEC 61482-1-1:2009 Open Arc Test Method Cal Rating – 10cal/cm²
  • IEC 61482-1-2:2007 Box Test Method Class 1 or Class 2 – Class 1

Arc Flash Jacket Category 2

Features & Benefits

  • Arc Flash protection and Flame Resistant fabric
  • Mandarin collar – maximum neck protection
  • Vertical chest pocket with zipper – discreet design
  • Gas monitor loop – secure fixing point
  • SafetyICONTM on arm – visual EN Standards icon system
  • 5cm Flame Resistant AS Reflective Tape – double stitched for longer life
  • Phone Pocket on sleeve with flap – safe and secure
  • Velcro® secured cuff tabs – close fit around wrist or gloves
  • Side access pockets with flaps – prevents entry of debris
  • ThermSAFETM plastic FR zipper – CE Certified
  • Extended back – protection when bending over
  • Double stitched side seams – Lifetime quality assurance
  • Easy-StretchTM side panels – maximum wear comfort
  • Adjustable waist straps – for a close fit
  • Arc Flash CalculatorsGarment Order Code – ProGARM 4608
  • Category 2 Arc Flash Protection
  • See full range of Arc Flash Clothing, PPE & Protection Garments 

Arc Flash Jacket Category 2 10 Cal Hi Vis Orange

European Standards

ProGARM 4608 arc flash jacket conform to the following European Standards:

  • EN ISO 11611:2015 | Class 1 | A1
  • EN ISO 11612: 2015 | A1 | B1 | C1 | E1
  • EN 1149-5:2008
  • EN ISO20471:2013 | Class 2
  • IEC 61482-2:2009 | Class 1 | EBT50=9.5cal/cm2ARC2 Rating

Care Information

ProGARM 4608 arc flash jacket conform must be carefully cleaned to ensure arc flash protection levels are maintained.

  • Do not bleach, boil or use soap based products – clean polo shirts using detergents only
  • Dirty clothing may lead to reduction in arc flash protection
  • Company will not accept liability for garments where care labels have been ignored, neglected, defaced or removed
  • Always store arc flash clothing in clean dry conditions
  • Do not store in places subject to direct strong sunlight

Related Arc Flash Clothing Protection & Products

IEC 61482 PROTECTIVE CLOTHING AGAINST THE THERMAL HAZARDS OF AN ELECTRIC ARC

Arc flash clothing and garments in a layered combination deliver workwear protection against hazards according to IEC 61482 – PPE protects the worker against electric arc flash dangers. According to IEC 61482-1-1:2009 (encompassing NFPA 70E 2015) the 4 arc risk categories are numbered according to the severity threat and determine the clothing protection level required to protect against a minimum level of incident energy measured in calories / cm² – this is the ‘Open Arc’ test method and measures clothing protection level according to the Arc Thermal Performance Value (ATPV). The ‘Box Arc’ tests clothing materials and fabric according to a pass/fail test by exposure to electric arc produced by 4kA (Class 1) and 7kA (Class 2) short circuits – this is IEC 61482-1-2:2007.

ARC 1 4 Cal ♦ ARC 2 8 Cal ♦ ARC 3 25 Cal ARC 4 40 Cal 

IEC Standard 61482 – Class 1

Garment Category – Jacket

Order Code – ProGARM 4608

  • Anti Static BS EN 1149-5:2008 Electrostatic Properties Of Protective Clothing
  • Flame Resistant EN ISO 11612:2015 Protective Clothing Against Heat & Flame

Arc Flash Jacket Category 2 10 Cal

Arc Flash

Arc Flash Protection Clothing & Garments | Polo Shirts | Jackets | Coveralls | Trousers | Sweatshirts | Helmets | Gloves | LV MV HV