Arc Flash Jacket Category 3 32.3 Cal
Arc Flash Clothing
Class 3 Fleece Jacket By ProGarm
ProGARM Arc Flash Fleece Jacket provides a clothing protection against layer level of Category 3 (32.3 cal/cm²) is achieved according to IEC 61482-1-1:2009 ‘open arc’ test method.
Specifically designed to be worn with arc flash jacket 5808 or arc flash jacket 5850 as an extra layer for winter warmth or with any other ProGARM garments for additional Flame Resistant and Arc Flash protection.
Should you require guidance on selection and use of an Arc Flash Calculator please call Thorne & Derrick, the UK’s leading specialist distributor of electrical safety equipment for LV (Low Voltage), MV (Medium Voltage) and HV (High Voltage).
Arc flash fleece jacket sizes ranging from S-4XL.
Premium navy long lined fleece which can be wore on it’s own as well as with other ProGARM jackets.
Arc Flash Protection
- IEC 61482-1-1:2009 Open Arc Test Method Cal Rating – 32.3cal/cm²
- IEC 61482-1-2:2007 Box Test Method Class 1 or Class 2 – Class 1
Arc Flash Fleece Jacket Category 3
Features & Benefits
- Mandarin collar – maximum neck protection
- Two front pockets with zippers – secure storage
- Internal Pocket – with secure velcro tab
- Drawcord waist adjustment with toggles – close waist fit
- SafetyICONTM on arm – visual EN Standards icon system
- Elasticated cuff – close fit fleece jacket around wrist
- ThermSAFETM plastic Flame Resistant zipper – CE Certified
- Extended back – protection when bending over
- Garment Order Code – ProGARM 5790
- Category 3 Arc Flash Protection
- See full range of Arc Flash Clothing, PPE & Protection Garments
ProGARM 5850 arc flash jacket conform to the following European Standards:
- EN ISO 11612:2015 | A1 | B1 | C1
- EN 1149-5:2008
- IEC 61482-2:2009 | Class 1 4kA | ATPV 32.3cal/cm2ARC3 Rating
Arc Flash Jacket | Care Information
ProGARM 5850 arc flash jacket must be carefully cleaned to ensure arc flash protection levels are maintained.
- Do not bleach, boil or use soap based products – clean polo shirts using detergents only
- Dirty clothing may lead to reduction in arc flash protection
- Company will not accept liability for garments where care labels have been ignored, neglected, defaced or removed
- Always store arc flash clothing in clean dry conditions
- Do not store in places subject to direct strong sunlight
Arc Flash Fleece Jacket Size Chart
|Chest to Fit (inches)||34-36||36-38||38-41||41-44||44-46||46-50||50-52||52-56||56-58|
|Chest to Fit (cm)||85-90||90-95||95-102.5||102.5-110||110-115||115-125||125-130||130-140||140-145|
Related Arc Flash Clothing Protection & ProductS
IEC 61482 PROTECTIVE CLOTHING AGAINST THE THERMAL HAZARDS OF AN ELECTRIC ARC
Arc flash clothing and garments in a layered combination deliver workwear protection against hazards according to IEC 61482 – PPE protects the worker against electric arc flash dangers. According to IEC 61482-1-1:2009 (encompassing NFPA 70E 2015) the 4 arc risk categories are numbered according to the severity threat and determine the clothing protection level required to protect against a minimum level of incident energy measured in calories / cm² – this is the ‘Open Arc’ test method and measures clothing protection level according to the Arc Thermal Performance Value (ATPV).
The ‘Box Arc’ tests clothing materials and fabric according to a pass/fail test by exposure to electric arc produced by 4kA (Class 1) and 7kA (Class 2) short circuits – this is IEC 61482-1-2:2007.
ARC 1 4 Cal ♦ ARC 2 8 Cal ♦ ARC 3 25 Cal ♦ ARC 4 40 Cal
IEC Standard 61482 – Class 1
Garment Category – Jacket
Order Code – ProGARM 5790
- Anti Static BS EN 1149-5:2008 Electrostatic Properties Of Protective Clothing
- Flame Resistant EN ISO 11612:2015 Protective Clothing Against Heat & Flame