Arc Flash Ladies Coverall Category 2 9 Cal

ProGARM Arc Ladies Flash Coverall provides Category 2 protection with 9cal/cm² according to IEC 61482-1-1:2009 ‘open arc’ test method.

Designed to offer protection to female workers in Petrochemical, Utility and associated industries.

Arc flash coverall sizes ranging from 8-18 REG LEG (31″/81cm)

Ladies-ﬁt premium quality coverall in VXS⁺ super soft Flame Resistant fabric 300g/m²

Arc Flash Protection

IEC 61482-1-1:2009 Open Arc Test Method Cal Rating – 9cal/cm²
IEC 61482-1-2:2007 Box Test Method Class 1 or Class 2 – Class 1

Arc Flash Ladies coverall Category 2

Features & Benefits

Arc Flash protection and Flame Resistant
Mandarin collar – maximum neck protection
Kneepad pockets – wear with kneepads for extra comfort
Chest Pockets with zippers – secure storage
Gas monitor loop – secure fixing point
SafetyICON^TM on arm – visual EN Standards icon system
5cm FR AS Reflective Tape – double stitched for longer life
Phone Pocket on sleeve with flap – safe and secure
Velcro^® secured cuff tabs – close fit around wrist or gloves
Side access pockets with flaps – with entry inside coverall
ThermSAFE^TM plastic Flame Resistant zippers – CE Certified
Internal elastic two-point adjustable waistband – ensures close fit
Triple stitched side seams – Lifetime quality assurance
Easy-Stretch^TM side panels – maximum wear comfort
Action back for improved comfort
Garment Order Code – ProGARM 6446
Category 2 Arc Flash Protection
See full range of Arc Flash Clothing, PPE & Protection Garments

European Standards

ProGARM 6446 arc flash coveralls conform to the following European Standards:

EN ISO 11611:2015 | Class 1 | A1
EN ISO 11612:2015 | A1 | B1 | C1 | E1
EN 1149-5:2008
EN ISO20471:2013 | Class 2
IEC 61482-2:2009 | Class 1 | ATPV=12.0cal/cm2Fabric Tested to BS
EN 13034:2005ARC2 Rating

Care Information

ProGARM 6446 arc flash coveralls must be carefully cleaned to ensure arc flash protection levels are maintained.

Do not bleach, boil or use soap based products – clean polo shirts using detergents only
Dirty clothing may lead to reduction in arc flash protection
Company will not accept liability for garments where care labels have been ignored, neglected, defaced or removed
Always store arc flash clothing in clean dry conditions
Do not store in places subject to direct strong sunlight

Related Arc Flash Clothing Protection & Products

Arc Flash T-Shirt ProGARM 5430

Arc Flash Sweatshirt Category 2 13.2 Cal Hi Vis Yellow

Arc Flash Sweatshirt ProGARM 5626

Arc Flash Jacket ProGARM 5808

IEC 61482 PROTECTIVE CLOTHING AGAINST THE THERMAL HAZARDS OF AN ELECTRIC ARC

Arc flash clothing and garments in a layered combination deliver workwear protection against hazards according to IEC 61482 – PPE protects the worker against electric arc flash dangers. According to IEC 61482-1-1:2009 (encompassing NFPA 70E 2015) the 4 arc risk categories are numbered according to the severity threat and determine the clothing protection level required to protect against a minimum level of incident energy measured in calories / cm² – this is the ‘Open Arc’ test method and measures clothing protection level according to the Arc Thermal Performance Value (ATPV). The ‘Box Arc’ tests clothing materials and fabric according to a pass/fail test by exposure to electric arc produced by 4kA (Class 1) and 7kA (Class 2) short circuits – this is IEC 61482-1-2:2007.

ARC 1 4 Cal ♦ ARC 2 8 Cal ♦ ARC 3 25 Cal ♦ ARC 4 40 Cal

IEC Standard 61482 – Class 1

Garment Category – Coverall

Order Code – ProGARM 6446

Anti Static BS EN 1149-5:2008 Electrostatic Properties Of Protective Clothing
Flame Resistant EN ISO 11612:2015 Protective Clothing Against Heat & Flame