15kV 17.5kV Cable Termination Kits HV 3 Core XLPE Indoor (Heat Shrink)

Cable Termination 15kV

Cable Termination 15kV | 3 Core | XLPE | Indoor

XLPE cable termination kits using heat shrink technology are suitable for indoor terminating of medium/high voltage (MV-HV) 3 core cables up to 17.5kV.

Used to terminate 15kV/17.5kV power cables into MV-HV switchgear, transformer, motor or cable boxes – outdoor 15kV cable termination version available.

3 Core XLPE Cable Termination


  • Cable Termination Type – Heat Shrink
  • Termination Location – Indoor
  • Voltage – 15kV / 17.5kV
  • Cable Insulation Type – XLPE EPR (Polymeric)
  • Number of Cores – 3 Core
  • Conductors – 25sqmm, 35sqmm, 50sqmm, 70sqmm, 95sqmm, 120sqmm, 150sqmm, 185sqmm, 240sqmm, 300sqmm, 400sqmm
  • Heat Shrink Standard Tail Length – 650mm
  • Suit 15kV Cables – BS6622, BS7835, BS7870, BS6883, BS7917 & IEC60502-2

15kV cable Termination Testing & Selection

Shrink Polymer Systems test 15kV heat shrink joints and terminations as detailed in CENELEC standards HD 628 S1 and 629.1 S2:2006 encompassing VDE 0278 and IEC 60502.

The following table enables the heat shrink termination kit selection for 3 core indoor XLPE cables up to 17.5kV – customised terminations available to suit all types of high voltage polymeric cables cables.

 ➡ More 15kV Terminations : Single Core Indoor 17.5kV XLPE | Single Core Outdoor 17.5kV XLPE

Also MV HV3M Cold Shrink Terminations | Euromold Separable Connectors | Pfisterer Inner Cone Plugs | Cable Cleats | Cable Glands | Duct SealsTools 

15kV/17.5kV Cable Termination Indoor  XLPE Cable Termination Kit Range – 3 Core 15kV/17.5kV Cable Termination Outdoor 
3TIS-17.5X-A 25-70sqmm 3TES-17.5X-A
3TIS-17.5X-B 95-185sqmm 3TES-17.5X-B
3TIS-17.5X-C 240-400sqmm 3TES-17.5X-C

Cable Termination Kit List

Anti Track Heat Shrink Core Tubes (Red) 3
Stress Control Heat Shrink Tubes (Black) 3
Yellow Stress Relief Tape (Screened HV XLPE Cable only) 3
3 Core Breakout Boot 1
Red Mastic Sealing Tape 1
XLPE Cable Cleaning Degreasing Wipes 3
HV Jointing Instructions 3 Core XLPE Indoor 1


Cable Terminations 11kV 33kV - Heat Shrink

Watch how to install MV HV Terminations & Joints

15kV Termination Accessories

Complete supporting range of indoor cable termination accessories for 15kV 3 core cables.

15kV 17.5kV Cable Termination Kits

15kV Cable Termination Bushing Boots | Cable Glands | Screen Earth Kits | Cable Lugs

HV Terminations, Connectors, Plugs

T&D distribute HV heat shrink, cold shrink and plug-in style cable terminations and connectors for high voltage connection of power cables to air, gas or oil insulated switchgear and transformers, 11kV-33kV.

11kV 33kV Joints Terminations Connectors - 3M Pfisterer Nexans Elastimold

T&D Approved Stockist – 3M, Elastimold, Nexans Euromold & Pfisterer

Data Sheets