3 Core 95sqmm BS5467 XLPE SWA Cable
3 CORE BS5467 CABLE
95 SQMM
3 core 95sqmm BS5467 XLPE SWA cable glands suitable for terminating steel wire armoured (SWA) cable with XLPE insulation, 3 core 95sqmm copper conductors – indoor, outdoor and hazardous area types available.
Cable glands, cleats, joints and crimp lugs are available to install all types of Low Voltage SWA Armoured Cables.
➡ Thorne & Derrick stock and distribute glands, cleats, joints and cable crimp lugs to terminate and install all types of Low Voltage SWA Armoured Cables into switchgear, distribution boards and feeder pillars.
- Conductor Cross Section Area: 95sqmm
- Approximate Diameter Under Armour (SWA): 29mm
- Cable Outside Diameter: 29mm
- Nominal Diameter Of Wire Armours (SWA): 2mm
- Approximate Cable Weight: 4100kg/km
- Current Rating Direct In Ground: 266 Amps
- Current Rating In Duct: 218 Amps
- Current Rating In Air: 263 Amps
- Indoor Cable Termination: BW40 Cable Gland
- Outdoor Cable Termination: CW40 Cable Gland
- 95sqmm Cable Lugs using Cembre A Range Crimps
Cable Core Identification
Blue – Brown
To terminate BS5467 3 core 95sqmm XLPE armoured cable in hazardous areas use Prysmian KA472-57 E1WF cable gland.
Should you require any technical support to connect, terminate or gland any type of LV-HV cable please do not hesitate to contact us
.
BW & CW Cable Glands Suit 3 Core 95sqmm XLPE SWA BS5467 Cables
➡ The following selection table enables the specification of the correct BW Cable Gland to terminate 2, 3 and 4 core armoured cables (SWA) in indoor environments, 600/1000V.
Number of Cores | 1.5sqmm | 2.5sqmm | 4sqmm | 6sqmm | 10sqmm | 16sqmm | 25sqmm | 35sqmm | 50sqmm | 70sqmm | 95sqmm | 120sqmm | 150sqmm | 185sqmm | 240sqmm | 300sqmm | 400sqmm |
2 Core Cable | BW20S | BW20S | BW20S | BW20 | BW20 | BW25 | BW25 | BW32 | BW25 | BW32 | BW32 | BW40 | BW40 | BW50 | BW50 | BW63 | BW63 |
3 Core Cable | BW20S | BW20S | BW20S | BW20 | BW20 | BW25 | BW32 | BW32 | BW32 | BW32 | BW40 | BW50 | BW50 | BW50 | BW63 | BW63 | BW75S |
4 Core Cable | BW20S | BW20S | BW20 | BW20 | BW25 | BW25 | BW32 | BW32 | BW32 | BW40 | BW50 | BW50 | BW50 | BW63 | BW63 | BW75S | BW85 |
Prysmian cable cleats suit all types of LV HV cable clamping requirements, including LV (BS5467 BS6883 BS6724) and 11kV-33kV (BS6622 BS7870).
Cable Accessories
T&D distribute cable accessories including to support the installation of BS5467 Power Cables including:
Ellis Cleats | Cembre Lugs | 3M Scotchcast Joints | Prysmian Glands – Low Voltage Cable Accessories