Heat Shrink Cable Caps 3M SKE 30/76
3M SKE 30/76 are cable caps with an application range of 30-61sqmm outside diameter cables and designed for quick and easy insulation and sealing of cable end or crutches providing resistance to abrasion, weathering and chemical attack – suitable for LV (Low Voltage, MV (Medium Voltage and HV (High Voltage) cable end capping and seals.
Cable caps are suitable for use with de-energised (“dead”) cables: LV 600V 1000V | MV 11kV 33kV | HV 66kV 132kV – refer to cable abandonment kits for temporary or permanent sealing and grounding of LV cables up to 3.3kV subject to potential future energisation.
To seal the cable crotch/crutch area of multicore cables, 3 core and 4 core, refer to cable breakouts for reliable electrical insulation and environmental protection of cables.
The operating temperature range of the 3M SKE 4/10 heat shrink cable caps is from -55ºC (-67ºF) to 110ºC (230ºF), with a heat shrinking temperature minimum of 121ºC (250ºF) installed using heat shrink gas torches.
- Manufacturer 3M Electrical
- Part Number 3M SKE 30/76
- Product Description Heat Shrink Cable Caps
- Application Range 30-61sqmm Cables
- Ø Exp. 76mm
- Ø Recov. 30mm
- Length Recov. 140mm
- Wall Thickness Recov. 4.5mm
- Colour Black
- Material / Boot Outer Flexible Flame Retardant Polyolefin
- Adhesive / Inner Layer TTS-250, Thermoplastic 80°C
- RoHS 2011/65/EU Compliant
➡ See our complete range of cable terminations available for connection of LV MV HV cables into switchgear, transformers and electrical equipment including 11kV/33kV – complete range of Cold Shrink products including cable caps, breakouts, joints, terminations and shrink tubes available from stock.
Heat Shrink Cable Caps
|3M Heat Shrink Cable Cap Part Number||Application
|SKE 4/10||4 – 8||10||4||40||2.5|
|SKE 8/20||8 – 16||20||8||65||2.5|
|SKE 15/40||15 – 32||40||15||105||3.0|
|SKE 25/63||25 – 51||63||25||160||4.5|
|SKE 30/76||30 – 61||76||30||140||4.5|
|SKE 45/100||45 – 80||100||45||160||4.0|
|SKE 61/158||63 – 126||158||63||190||4.0|