Prysmian FPNF02R FP Firefix Double Cable Clip

Fire Resistant Cable clips Prysmian FPNF02R FP Firefix Double Cable Clip

Prysmian Firefix are double fire resistant cable clips which are LUL (London Underground) approved for the rapid installation of fire resistant alarm and emergency lighting cables – the Prysmian FPNF02R FP clip suits cables up to 8.5mm diameter.

The fire resistant cable clips meet the cable support requirements of the British Standard BS5839-1:2002.

The FPNF02R FP Firefix double cable clip is a new fixing for FP200 gold fire resistant cables for use in fire detection and fire alarm systems for buildings, voice alarm systems, emergency lighting systems and other essential service circuits – allowing significant installation cost savings.

Prysmian FPNF02R

FP Firefix Double Cable Clip

Technical Specification

  • Clip Colour – RedCable Cleats - LUL London Underground Approved
  • FPNF02R15 Cable Diameter – 7.7-8.5mm
  • Nail Size – 17mm
  • Kit Quantity – 500
  • Kit Contents – Clips, ITW nails and gas cartridge and pin guide adaptor. Nailing tool sold separately (Prysmian PULSA800E)
  • Fire Resistant Cable Clips
  • Double Cable Clips

 Prysmian FPNF02R FP Firefix Double Cable Clip

Prysmian FPNF02R FP Clip Dimensions

  • Height – 15mm
  • Width – 21.6mm
  • Length – 25.4mm
  • Clip Weight – 8.9g each
  • Kit Weight – 4.5kg

➡ See Prysmian Cable Cleats to view cable support clamps for LV, MV & HV cables including short-circuit protection for 11kV and 33kV medium/high voltage power cables.

Fire Resistant Cable Cleat Selection Table

Specification details for Prysmian FPNF02R double cable clip:

Prysmian FP Firefix Double Cable Clip Selection Prysmian FP Firefix Double Cable Clip Details
Prysmian BICON Order Code Cable Diameter Installed Dimensions (mm) Nail Size Kit Quantity Weight (g) Kit Weight (kg)
Standard Colour A (mm) Height Width Length
Min Max
FPNF02R Red 7.7 8.5 15 21.6 25.4 17mm 500 8.9 4.5

INSTALLING FP FIREFIX DOUBLE CABLE CLIP

  1. Attach adaptor to Pulsa tool
  2. Position the Firefix clip directly on to the adaptor
  3. Ensure the substrate is clear before pushing the Spit Pulsa tool against the substrate, and nailing the clip into position
  4. Place the cable into the clip
  5. Close clip
Prysmian FP Firefix Double Cable Clip - Fire Resistant

Prysmian FP Firefix Double Cable Clip – Fire Resistant Installation Steps

Prysmian – mv hv 11kv 33KV CABLE ACCESSORIES

 

Data Sheets